Changing One Touch And Speed Dial Numbers; Setting Up Groups For Broadcasting - Brother FAX-8350P Owner's Manual

6
Use the dial pad to enter the name (up to 15 characters). You can use
the chart of "Entering Text" in chap. 4 to help you enter letters. ––
OR–– Press Set and go to Step 8 to store the number without a
name.
7
Press Set.
8
The screen prompts you to select the type of number this is. Use
or
9
Press Set.
10
Return to Step 2 to store another Speed Dial number. ––OR–– Press
Stop to exit.
Changing One Touch and
Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where
a number is already stored, the screen displays the current name stored
there, then prompts you to either change it or exit.
1
Press 1 to change the number stored, or press 2 to exit without
making a change.
2
Enter a new number.
3
Follow the directions in Storing One Touch Dial or Speed Dial
Numbers.
See

Setting Up Groups for Broadcasting

"Storing
One Touch
Groups allow you to send the same fax message to many fax numbers by
Dial
Numbers"
pressing only one One Touch key. (This is called Broadcasting.) First,
and
you'll need to store each fax number as a One Touch or Speed Dial
"Storing
number. Then, you can combine them into a Group. Each Group uses up
Speed Dial
a One Touch key. Finally, you can have up to 6 small Groups, or you can
Numbers"
assign up to 131 numbers to one large Group.
in this
chapter
S E T U P Q U I C K - D I A L N U M B E R S
to select the type you want.
FAX a fax number
TEL a telephone (voice) number
F/T both a fax and telephone number
*01:BROTHER
1.CHANGE 2.QUIT
If you want to erase the number, press Clear when the cursor is
to the far left of the digits.
If you want to change a digit, use
under the digit you want to change, then enter it.
or to position the cursor
73