Module 4; Making A Measurement - Larson Davis Spartan 730 Reference Manual

4

Module 4

IN THIS SECTION:

4.1 Making a Measurement - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 48

4.2 Best Practices for Measuring Noise Exposure - - - - - - - - - - - - - - - - - - - - - 51
4.3 Deploying the Dosimeter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 54
4.1 Making a Measurement
You can also begin a
TAKE NOTE
measurement from the LD Atlas
app or G4.
Spartan 730/730IS Dosimeter Manual
Making a Measurement
Before you begin:
Calibrate your dosimeter. For help with this, see 2.6.1
•
"Calibrating Your Spartan Dosimeter" on page 26.
• Select a measurement configuration. For more information,
see 3.1 "Defining a Measurement Configuration" on page 31.
In this section, use
highlight an option. Use
Step 1. Press and hold the
Step 2. Highlight, then
Recommended Next Step:
• 4.3 Deploying the Dosimeter
Making a Measurement
or
UP DOWN
SELECT
select button to enter the Menu.
Run. The measurement begins.
select
on the dosimeter to
to set the option.
48