3.4 Setting a Measurement Timer
Spartan 730/730IS Dosimeter Manual
Enabling or Disabling LED Alarm Lights
When enabled, the LED alarm lights on the Spartan 730 provide exposure
feedback to the wearer based on the Source metric, and the Action and Limit
levels you set. The LED is yellow when the exposure level is between the action
and limit levels, and red when the exposure is equal to or above the limit level.
•
From the Alarm 1 menu, highlight LED Off/On by pressing
•
Press
select
Step 5. When your alarm is configured, quick press
menu at any time.
Recommended Next Step:
•
3.4 Setting a Measurement Timer
IN THIS SECTION:
•
3.4.1 Setting a Timed Stop Measurement Timer
•
3.4.2 Setting a Daily Measurement Timer
•
3.4.3 Disabling a Measurement Timer
Measurement timers enable you to gather noise exposure data at specific times
without interfering with the wearer's daily routine. Simply set the timer, install
the dosimeter on the wearer, and collect it at the end of the shift.
Setting a Measurement Timer
to toggle the highlighted option.
up
or down.
power
to exit one
43