Setting The Phone Line Type; Pabx And Transfer - Brother FAX-1840CN User Manual

Setting the Phone Line Type

If you are connecting the machine to a line that features a PABX
(PBX), ADSL or ISDN to send and receive faxes, it is also necessary
to change the Phone Line Type accordingly by completing the
following steps.
1
Menu/Set
Press
2
Press or
▲
ISDN (or Normal ).
Menu/Set
Press
3
Stop/Exit
Press

PABX and TRANSFER

The machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a
central telephone system or Private Automatic Branch Exchange
(PABX). Your machine can be connected to most types of PABX.
The machine's recall feature supports timed break recall only (TBR).
TBR will work with most PABX systems allowing you to gain access
to an outside line, or transfer calls to another extension. The feature
works when the
■
You can program a
in a One-Touch or Speed-Dial location. When programming
the One-Touch or Speed-Dial number (Menu/Set 2-3-1 or
2-3-2) press
telephone number. If you do this, you do not need to press
R
each time before you dial using a One-Touch or
Speed-Dial location. (See Storing numbers for easy dialling
on page 5-1.)
■
For FAX-1840CN, press
key.
2 - 3 GETTING STARTED
0 5
, , .
to select PBX , ADSL ,
▼
.
.
R
key is pressed.
R
keypress as part of a number stored
R
first (the screen displays "!"), then enter the
5.Phone Line Set
R
key while holding down the
Shift