Setting The Phone Line Type; Setting The Lcd Contrast - Brother MFC-7840W Quick Setup Manual

STEP 1
Setting Up the Machine
9

Setting the phone line type

If you are connecting the machine to a line that
features a PABX (PBX) or ISDN to send and receive
faxes, it is also necessary to change the phone line
type accordingly by completing the following steps.
1
Press Menu.
2
Press 0.
3
Press 6.
4
Press
or Normal.
Press OK.
Do one of the following:
If you choose ISDN or Normal, go to step
8.
If you choose PBX, go to step 5.
5
Do one of the following:
If you want to change the current prefix
number, press 1 and go to step 6.
If you do not want to change the current
prefix number, press 2 and go to step 8.
Note
The default setting is "!". When you press Tel/R,
"!" will be displayed on the LCD.
6
Enter the Prefix number (up to 5 digits) on the
dial pad, and then press OK.
Note
You can use the number 0 to 9 , # ,
(Press Tel/R to display "!".)
You cannot use ! with any other numbers or
characters.
If your telephone system requires a timed break
recall, press Tel/R to enter the break.
7
Press
press OK.
Note
• If you choose On, pressing Tel/R (the screen
displays "!") will let you access an outside line.
• If you choose Always, you can access an outside
line without pressing Tel/R.
8
Press Stop/Exit.
10
or to choose PBX, ISDN
and !.
l
or to choose On or Always and
10

Setting the LCD contrast

You can change the contrast to help the LCD look
lighter or darker.
1
Press Menu.
2
Press 1.
3
Press 7.
4
Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press OK.
5
Press Stop/Exit.