Setting The F/T Ring Time (Fax/Tel Mode Only); Setting The Fax/Tel Announcement; (Fax-1940Cn Only) - Brother FAX-1840CN User Manual

Setting the F/T Ring Time (Fax/Tel mode only)

If you set the Receive Mode to Fax/Tel, you'll need to decide how long
the machine will signal you with its special pseudo/double-ring when
you have a voice call. (If it's a fax call, the machine prints the fax.)
This pseudo/double-ring happens after the initial ringing from the
phone company. Only the machine rings and no other phones on the
same line will ring with the special pseudo/double-ring. However, you
can still answer the call on any telephone. (See Fax/Tel mode on page
A-3.)
1
If it is not illuminated in green, press
2
Menu/Set
Press
3
Press or
▲
machine will ring to alert you that you have a voice call (20, 30,
40 or 70 seconds).
Menu/Set
Press
4
Stop/Exit
Press
Even if the caller hangs up during the pseudo/double-ringing,
the machine will continue to ring for the set time.

Setting the Fax/Tel Announcement

(FAX-1940CN only)

For the Fax/Tel receive mode, you can set up the machine to play an
outgoing announcement for callers when no one is there to answer
calls. (See Record Fax/Tel Outgoing Announcement (F/T OGM) on
page 7-7.)
4 - 7 SETUP RECEIVE
2 1 2
, , , .
to select how long the
▼
.
.
Fax
( ).
2.F/T Ring Time