Setting The Phone Line Type - Brother MFC-7840W Quick Setup Manual

STEP 1
Setting Up the Machine
8

Setting the phone line type

If you are connecting the machine to a line that
features a PABX (PBX) or ISDN to send and receive
faxes, it is also necessary to change the phone line
type accordingly by completing the following steps.
1
Press Menu.
2
Press 0.
3
Press 6.
4
Press
or Normal.
Press OK.
Do one of the following:
If you choose ISDN or Normal, go to step
8.
If you choose PBX, go to step 5.
5
Do one of the following:
If you want to change the current prefix
number, press 1 and go to step 6.
If you do not want to change the current
prefix number, press 2 and go to step 8.
Note
The default setting is "!". When you press Tel/R,
"!" will be displayed on the LCD.
6
Enter the Prefix number (up to 5 digits) on the
dial pad, and then press OK.
Note
You can use the number 0 to 9 , # ,
(Press Tel/R to display "!".)
You cannot use ! with any other numbers or
characters.
If your telephone system requires a timed break
recall, press Tel/R to enter the break.
7
Press
press OK.
Note
• If you choose On, pressing Tel/R (the screen
displays "!") will let you access an outside line.
• If you choose Always, you can access an outside
line without pressing Tel/R.
10
or to choose PBX, ISDN
and !.
l
or to choose On or Always and
8
Press Stop/Exit.
Note
PBX and TRANSFER
The machine is initially set to Normal, which lets
the machine connect to a standard PSTN (Public
Switched Telephone Network) line. However,
many offices use a central telephone system or
Private Automatic Branch Exchange (PABX). Your
machine can be connected to most types of PABX
(PBX). The machine's recall feature supports
timed break recall only (TBR). TBR will work with
most PABX (PBX) systems allowing you to gain
access to an outside line, or transfer calls to
another extension. The feature works when Tel/R
is pressed.