Setting The Station Id - Brother FAX-1840CN User Manual

Setting the Station ID

You should store your name or company name and fax number so
they print on all fax pages you send.
It is important that you enter the fax number in the internationally
standardised format, i.e. in accordance with the following strict
sequence:
■
The "+" (plus) character (by pressing
■
Your Country Code (e.g. "44" for the United Kingdom, "41" for
Switzerland)
■
Your local area code minus any leading "0" ("9" in Spain)
■
A space
■
Your number on the local exchange, using spaces to aid
readability as appropriate.
As an example, if the machine is installed in the United Kingdom and
the same line is to be used for both fax and voice calls, and your
national telephone number is 0161 444 5555, then you must set the
fax and telephone number parts of your station ID as:
+44 161 444 5555.
1
Menu/Set
Press
2
Enter your fax number
(up to 20 digits).
Menu/Set
Press
You cannot enter a hyphen. To enter a space press
between numbers.
3
Use the dial pad to enter your name (up to 20 characters).
(See Entering Text on page B-13.)
Menu/Set
Press
4
Stop/Exit
Press
If the Station ID has already been programmed, the LCD will ask
you to press
0 3
, , .
.
.
.
1
to make a change or
key)
3.Station ID
2
to exit without changing.
GETTING STARTED 2 - 2
once