Selecting A Frequency Band; Tuning To A Frequency - Yaesu FT5Dr Operating Manual

Selecting a Frequency Band

Press the [BAND] key to select the desired frequency
band.
1. Press the [F menu] key to display the function menu
screen.
2. Press the [BAND] key to switch the frequency bands
in reverse order.
3. Press the [BACK] key to return to the previous
screen.
Unwanted frequency bands can be set in the setup menu so they are not displayed in the
A-band or the B-band. Use Set Mode [CONFIG]  [22 BAND SELECT] (see page 66).
The frequency bands that can be selected for each of the A and B bands are as follows:
● Frequency bands on A-band
AM BC Band
520ｋHz～1710ｋHz
144 MHz Band
137MHz～174MHz 174MHz～222MHz 222MHz～420MHz 420MHz～470MHz
● Frequency bands on B-band
AIR Band
108MHz～137MHz

Tuning to a Frequency

● DIAL knob
1. Press the [F menu] key to display the function menu
screen.
2. Rotating the DIAL knob, the frequency will change in
1 MHz steps.
3. Press the [BACK] key to return to the previous
screen.
● The numeric keys
1. Touch and hold the frequency displayed on the LCD.
The numeric keypad appears.
2. Enter the frequency using the numeric keys.
Example: To input 145.520 MHz
［1］ ［4］ ［5］
 
Example: To input 430.000 MHz
［4］ ［3］ ［ENT］
 
When entering a frequency using the numeric keys, it
may be canceled by pressing the PTT switch or any key.
22
FM BC Band
76 (88*)MHz～108MHz 1.8MHz～30MHz
VHF (1) VHF (2)
144 MHz Band VHF (1)
137MHz～174MHz 174MHz～222MHz 222MHz～420MHz 420MHz～470MHz
［5］ ［2］
 
50 MHz Band
SW Band
30MHz～76 (88*)MHz
430 MHz Band
470MHz～770MHz
VHF (2)
AIR Band
108MHz～137MHz
* Europe version
UHF (1) UHF (2)
770MHz～999.995MHz
430 MHz Band UHF (1)
470MHz～579.995MHz
145.000