Yaesu FT5Dr Operating Manual page 29

6. To check whether or not other stations are operating within communications range,
press the [GM/X] key to turn the GM (Group Monitor) function ON.
• The other stations also need to turn the GM (Group Monitor) function ON.
• Refer to the separate Operating Manual GM Edition for details on how to use the
GM function (download the manual from our YAESU website).
7. Press the [GM/X] key to turn the GM (Group Monitor) function OFF and return to the
normal operation.
• While setting the DG-ID number, pressing and holding the [GM/X] key will set the transmit
and the receive DG-ID numbers to "00".
• If the receive DG-ID is set to a number other than "00", only signals with that DG-ID will be
received. Normally, set the receive DG-ID number to "00" except when communication is
desired only with group members.
• The transmit and receive DG-ID default number is set to "00".
Communicating only with the specific members by setting the DG-ID number
except for "00"
Example: Set the DG-ID number of to "50"
1. Press the [F menu] key, and touch [DG-ID].
If [DG-ID] is not displayed, touch [BACK
[DG-ID] and then touch it.
The DG-ID number setting screen will be displayed.
2. Press the [F menu] key, then rotate the DIAL knob to
set the transmit DG-ID (DG-ID TX) to "50".
3. Press the [F menu] key again, then rotate the DIAL
knob to select the receive DG-ID (DG-ID RX).
4. Press the [F menu] key, then rotate the DIAL knob to
set the receive DG-ID (DG-ID RX) to "50".
] to display
DG-ID TX : 00
DG-ID RX : 00
DG-ID TX : 50
DG-ID RX : 00
DG-ID TX : 50
DG-ID RX : 00
DG-ID TX : 50
DG-ID RX : 50
27