Yaesu FT5Dr Operating Manual page 68

Setup Menu no. / item
22 BAND SELECT
23 DIAL KNOB CHANGE
APRS
* For details of the functions, refer to the APRS Instruction Manual.
1 APRS AF DUAL
2 APRS DESTINATION
3 APRS FILTER
4 APRS MODEM
5 APRS MSG FLASH
6 APRS MSG GROUP
7 APRS MSG TEXT
8 APRS MUTE
9 APRS POPUP
66
Description
Set the frequency bands that can
be selected for A-band and B-band
("OTHER" includes 50MHz band*,
VHF (1), VHF (2), UHF (1), UHF (2)*)
* A band only
Select a vibrator mode and set up the
vibrator function.
Turn ON/OFF the muting function
when both the APRS function and AF
dual function are active.
Display the model code.
Select the filter function.
Set the APRS baud rate.
Set the strobe to flash when there is
an incoming message.
Group filtering for received messages. G1: ALLxxxxxx
Input the fixed text message.
Set the B-band AF muting function
on/off when APRS is active.
Set the beacon type, message type
and time for pop-up display.
Selectable options
(Options in bold are the default settings)
AIR: ON / OFF
VHF: ON / OFF
UHF: ON / OFF
OTHER: ON / OFF
SW*: ON / OFF
AM*: ON / OFF
FM*: ON / OFF
*A-band only.
-
ON / OFF
APY05D (Uneditable)
Mic-E ： ON / OFF
POSITION ： ON / OFF
WEATHER ： ON / OFF
OBJECT ： ON / OFF
ITEM ： ON / OFF
STATUS ： ON / OFF
OTHER ： ON / OFF
ALTNET ： ON / OFF
OFF / 1200bps / 9600bps
MSG ：
OFF / 2sec to 60sec / CONTINUOUS /
EVERY 2s to EVERY 10m 4sec
GRP ：
OFF / 2sec to 60sec / CONTINUOUS
4sec
BLN ：
OFF / 2sec to 60sec / CONTINUOUS
4sec
G2 ： CQxxxxxxx
G3 ： QSTxxxxxx
G4 ： YAESUxxxx
G5 ： - - - - - - - - -
B1 ： BLNxxxxxx
B2 ： BLNx
B3 ： BLNx
1 to 8
ON / OFF
The setting values of Mic-E, POSITION,
WEATHER, OBJECT, ITEM, STATUS,
OTHER, MY PACKET, MSG, GRP and BLN
are as follows.
OFF / ALL2s to ALL60s / ALLCNT /
BND2s to BND60s / BNDCNT ALL10s
The setting values of MY MSG, DUP.BCN,
DUP.MSG, ACK.REJ and OTHER MSG are
as follows. ：
OFF / BND2s to BND60s BND10s