Yaesu FT5Dr Operating Manual page 50

Hands-free operation with a Bluetooth
When FT5DR/DE's VOX (automatic voice transmission) function is turned on, you can
®
use the Bluetooth
just by talking.
Turn on the VOX function according to "VOX Operation" (page 50).
The VOX function settings are the same for the Bluetooth
the transceiver. If you do not use the Bluetooth
with the transceiver microphone, set it to OFF.
Send by pressing the button on the Bluetooth
When the VOX function is OFF, pressing the "Call button*" on the Bluetooth
set once will keep the FT5DR/DE in transmit and you can make a call using the
®
Bluetooth headset.
If you press the "Call button"* again, FT5DR/DE will return to
the reception state.
*The button name may differ depending on your Bluetooth
headset.
SSM-BT10: When the Multi-Function Key is pressed, a beep will sound and the FT5DR/
DE will continue to transmit.
Press the Multi-Function Key again, a beep will sound and the FT5DR/DE
will be in receive mode.
Press the PTT switch on the FT5DR/DE to speak into the microphone of the Bluetooth
headset regardless of whether the VOX function is ON or OFF.
48
headset to perform hands-free operation that transmits automatically
®
headset (VOX function)
®
headset and the microphone of
®
headset and do not use the VOX function
®
headset (when the VOX function is OFF)
®
®
head-
Press briefly to transmit
®