Operation Keys; Changing The Transceiver Settings - Yaesu FT5Dr Operating Manual

Operation Keys

Pressing each time switches between
F menu key
function screen and normal screen.
Pressing each time switches between
A/B key
A-band and B-band.
Pressing each time increases the fre-
BAND key
quency band.
Press to turn the GM function ON/
key
OFF.
Pressing each time switches between
V/M ● key
VFO mode and memory mode.
Pressing each time switches between
PMG (Primary Memory Group Activity
PMG ● key
Monitor) mode and memory or VFO
mode.
BACK key
Return to the previous screen.

Changing the Transceiver settings

1. Press and hold the [F menu] key.
The SETUP MENU screen will be displayed.
2. Touch the desired item in Setup Menu.
The Sub-menu screen will be displayed.
May also be operated by rotating the DIAL knob
to select the desired item in Setup Menu, and then
press the [F menu] key.
3. Press the PTT switch to save the settings and return
to normal operation.
Press the [BACK] key to save the settings and return
to the previous screen.
Press Press and Hold
Press and hold for over one second to
enter Setup Menu.
Press and hold for over one second
to switch between the Dual Band
Receive mode and the Mono Band
Receive mode.
-
In normal mode, press and hold for
over one second to start WIRES-X.
When WIRES-X is activated, press
and hold for over one second to return
to the normal mode.
Press and hold for over one second to
write to memory.
Press and hold for over one second to
writing to PMG memory.
-
5