Copying Menu Settings Between Base Units (Batch Setup); Transferring Settings From A Usb Flash Drive - Epson ELPBU01 User Manual

Copying Menu Settings Between Base Units (Batch Setup)

After selecting the base unit's menu settings for one base unit, you can use the
following methods to copy the settings to other base units, as long as they are
the same model.
• by using a USB flash drive
• by connecting a computer and base unit using a USB cable
You cannot copy any information unique to an individual base unit, such as
Operation Hours or Status.
Make sure Batch Setup Range is set to Limited if you do not want to
copy the following settings:
a
• Password Protection settings
• Network menu settings
s Management > Batch Setup Range
Caution
Epson takes no responsibility for batch setup failures and associated repair costs
due to power outages, communication errors, or other problems that may cause
such failures.
g g Related Links
• "Transferring Settings From a USB Flash Drive"
• "Transferring Settings From a Computer"

Transferring Settings From a USB Flash Drive

You can copy menu settings from one base unit to another of the same model
using a USB flash drive.
The USB flash drive must use a FAT format and not incorporate any
security function. Delete any files on the drive before using it for batch
a
setup or the settings may not be saved correctly.
a
Disconnect the AC adapter from the base unit, and check that base
unit's indicator has turned off.
p.92
p.93
b
Connect an empty USB flash drive directly to the base unit's USB-A
port.
c
Hold down the [Esc] button on the remote control and connect the AC
adapter to the base unit.
d
When the base unit's indicator turns on, release the [Esc] button.
The indicators start flashing and the batch setup file is written to the
USB flash drive. When writing is finished, the base unit turns off.
Caution
Do not disconnect the AC adapter or the USB flash drive from the base unit
while the file is being written. If the AC adapter or USB flash drive is
disconnected, the base unit may not start correctly.
e
Remove the USB flash drive.
The file name for the batch setup file is PJCONFDATA.bin. If
you need to change the file name, add text after PJCONFDATA
a
using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the base unit may not be
able to recognize the file correctly.
f
Disconnect the AC adapter from the base unit to which you want to
copy settings, and check that the base unit's indicator has turned off.
g
Connect the USB flash drive containing the saved batch setup file to the
base unit's USB-A port.
h
Hold down the [Menu] button on the remote control and connect the
AC adapter to the base unit.
i
When the base unit's indicator turns on, release the [Menu] button.
When the indicator starts flashing, the settings are being written. When
writing is finished, the base unit turns off.
92