Connecting Video Sources To The Base Unit; Connecting To A Computer; Connecting To Video Sources - Epson ELPBU01 User Manual

Connecting Video Sources to the Base Unit

See these sections to connect the base unit to a variety of input sources.
Attention
Check the shape and orientation of the connectors on any cable you plan to
connect. Do not force a connector into a port if it does not fit. The device or your
external display equipment could be damaged or could malfunction.
See the Quick Start Guide for a list of cables supplied with your
product. Purchase optional or commercially available cables when
a
necessary.
g g Related Links
• "Connecting to a Computer" p.26
• "Connecting to Video Sources"
• "Connecting to a Wired Network"
• "Connecting to a Document Camera"
• "Connecting to External Speakers"

Connecting to a Computer

If your computer has an HDMI port, you can connect it to the base unit using
an HDMI cable and send the computer's audio with the projected image.
To connect a Mac that does not have an HDMI port, you need an
adapter that allows you to connect to the projector's HDMI port.
a
Contact Apple for compatible adapter options. Older Mac computers
(2009 and earlier) may not support audio through the HDMI port.
a
Make sure the base unit and an external display equipment are
connected using supplied HDMI cable.
b
Connect the HDMI cable to your computer's HDMI output port.
p.26
p.27
p.27
p.27
c
Connect the other end to the base unit's HDMI1 or HDMI2 port.

Connecting to Video Sources

If your video source has an HDMI port, you can connect it to the base unit
using an HDMI cable and send the image source's audio with the projected
image.
Attention
Do not turn on the video source before connecting it to the base unit. Doing so
could damage the base unit.
a
Make sure the base unit and an external display equipment are
connected using supplied HDMI cable.
b
Connect the HDMI cable to your video source's HDMI output port.
26