Important Safety Instructions • Make sure you read the Quick Setup Guide and follow the instructions in this document to install the Interactive Unit. • Keep the Quick Setup Guide for future reference. Explanation of Symbols This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. Warning Caution This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
Page 3
Installation Precautions Warning • Attachment to the projector should be performed by qualified technicians using only approved mounting equipment. • Follow the instructions in the Quick Setup Guide when installing the Interactive Unit. Incomplete or incorrect installation could cause the product to fall and cause personal injury or property damage.
Page 4
Usage Precautions Warning • Water infiltration or deterioration and breakage of the product housing could result in electric shock. • Never open any covers on the product except as specifically explained in this User's Guide. Never attempt to disassemble or modify the product (including consumables). Refer all repairs to qualified service personnel.
Page 5
Battery Precautions Warning • If liquid leaking from the batteries gets into your eyes, do not rub your eyes. Wash them immediately with clean water and consult a doctor. • If liquid from the battery enters your mouth, rinse immediately with plenty of water and consult a doctor. •...
Introduction The Interactive Unit is a wall-mounted receiver that works with your projector to turn virtually any surface into an interactive whiteboard. You can use it with your projector and whiteboard. The Interactive Unit includes all the hardware and software you need to create interactive presentations using your computer and installed projector.
If you installed the optional Easy Interactive Tools, you can use the Easy Interactive Pen to write or draw on the projected image. You can also save what you wrote to your computer. You can download Easy Interactive Tools from the Epson website at http://www.epson.com.
Parts Location Interactive Unit Easy Interactive Pen Name Function When you press the button, the light turns green if there is Battery indicator light any remaining battery power. If it does not turn green, replace the batteries. s p.13 Name Function Functions as the right button of a mouse.
Parts Location Pen Tray Name Function Attach the pen tray to a whiteboard or wall. Fixing points Pass a commercially available lock through here. Security hole It is recommended that the pen tray be tightened with two commercially available M5 bolts.
Install the software necessary to use this product on your computer. You can use the interactive whiteboard function by installing the optional Easy Interactive Tools. You can download Easy Insert the CD labeled "Epson Projector Software for Easy Interactive Interactive Tools from the Epson website at http:// Function"...
Installing the Pen Batteries Before you can use the pen, you need to install the batteries. Press in the tab on the battery cover as you lift the cover off. Install two batteries, inserting the + and - ends as shown. Replace the battery cover and press it down until it clicks into place.
Connecting the Cables Connect the Interactive Unit, the computer, and the projector. Check that the projector and the computer are both on. Connect the projector's VGA computer cable to the computer's monitor out port. Connect the Interactive Unit's USB cable to the computer's USB port.
Using the Easy Interactive Pen The Easy Interactive Pen included with your Interactive Unit turns almost any wall or board into an interactive whiteboard. This chapter tells you how to calibrate your system and use the pens.
Perform the following operation. Windows Select or Start > All Programs or Programs > Epson Projector > Easy Interactive Driver. Mac OS X Mac OS X Open the Applications folder, and then select the Easy Interactive Driver icon.
Page 17
Calibrating Click the pen icon in the Dock, select Calibrate from the menu • For the most accurate calibration, make sure you hold the pen at an angle to the projection surface and touch the center of bar, then select Calibrate (Normal) or Calibrate (Advanced). the circle.
You can use the interactive whiteboard function by installing the optional Easy Interactive Tools. You can download Easy Interactive Tools from the Epson website at http://www.epson.com. Follow these tips to use the pen as a mouse: • For best performance, hold the pen at a slight angle (like a normal pen), rather than perpendicular to the board.
Tablet Function If you have installed Easy Interactive Driver, the tablet function in Windows Vista or Windows 7 is enabled. If Office 2003/2007/2010 is installed on your computer, you can use the ink function in Office by using the Easy Interactive Pen as a mouse. System Requirements The following 32 bit operating systems: Windows Vista...
Dock (Mac OS X), do one of the following: the projection surface. Windows Select or Start > All Programs or Programs > EPSON Projector > Tablet Function Problems Easy Interactive Driver. Mac OS X When Easy Interactive Driver is installed, the Easy Interactive Virtual Open the Application folder, then select the Easy Interactive Driver icon.
If you notice any problems or you think the Interactive Unit is broken, stop using it and contact your local dealer for further advice. Or visit http:// www.epson.com to locate a support or service representative in your area. Check the website periodically for updates to the Easy Interactive Driver...
Specifications General Electrical Image size XGA model 63 to 106 inches (4:3 XGA) Power supply voltage 5 V DC 60 to 100 inches (16:10 WXGA) Current consumption 180 mA 58 to 97 inches (16:9 widescreen) WXGA model 60 to 100 inches (4:3 XGA) Environmental 68 to 113 inches (16:10 WXGA) 66 to 110 inches (16:9 widescreen)
Specifications System Requirements For Windows Windows 2000 Service Pack 4 The following 32 bit operating systems: Windows XP Service Pack 2 or later Windows Vista Windows Vista Service Pack 1 or later Windows 7 The following 64 bit operating systems: Windows 7 Pentium III 1.2GHz or faster Recommended: Pentium M 1.6GHz or faster...
FCC Compliance Statement Cet appareil numérique de la classe B est conforme à la norma NMB-003 For United States Users du Canada. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits Since the Easy Interactive Pen is so small, FCC Statement for Verification is are designed to provide reasonable protection against harmful interference written in the manual.
Declaration of Conformity According to 47CFR, Part 2 and 15 for: Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: Epson America, Inc. Located at: MS 3-13 3840 Kilroy Airport Way...
Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the...