Base Unit Identification System For Multiple Device Control; Setting The Base Unit Id; Selecting The Base Unit You Want To Operate - Epson ELPBU01 User Manual

Base Unit Identification System for Multiple Device Control

When lining up multiple external display equipments to project images, you
can select split screen type or input source of each base unit.
You can set a unique base unit ID for each base unit to operate them
individually using a remote control, and then select the split screen type and
input source for each base unit.
g g Related Links
• "Setting the Base Unit ID" p.63
• "Selecting the Base Unit You want to Operate"

Setting the Base Unit ID

To control multiple base units from a remote control, give each base unit a
unique ID.
a
Press the [Menu] button, select the Installation menu, and press Enter
button.
p.63
b
Select Base Unit ID and press Enter button.
c
Use the arrow buttons to select the identification number you want to
use for the base unit. Then press Enter button.
d
Press [Menu] or [Esc] to exit the menus.
e
Repeat these steps for all the other base units you want to operate from
one remote control.

Selecting the Base Unit You want to Operate

After setting the base unit's ID, select the ID for the base unit you want to
operate using the remote control.
63