Epson ELPBU01 User Manual page 74

Controlling a Networked Base Unit Using a Web Browser
If the default Web Control Password is set, a screen prompting to
change the password appears before you can view the Advanced
a
screen. Follow the on-screen instructions to change the password.
It is strongly recommended to change password regularly to prevent an
unauthorized access to your base unit.
A Opens the menus.
B Displays the menu name you selected.
C Specifies the base unit settings.
D Lock/unlock the base unit settings.
E Updates the base unit settings.
You cannot change the following settings using Epson Web Control.
• HDMI Link
a
• Split Screen Setting
• Wireless LAN Diagnosis
• Language
• Search Access Point
• Event ID
• Antenna Level
• Start Pairing
• Reset Network Settings
• Firmware Update
You can select the following settings only with Epson Web Control.
• Monitor Password (up to 16 alphanumeric characters)
a
• Display Logs
• HTTP port (port number used for Web Control except for 80
[default], 843, 3620, 3621, 3625, 3629, 4352, 4649, 5357, 10000,
10001, 41794)
74