Solutions When You Cannot Connect Using Screen Mirroring; Solutions When You Cannot Use Two Screen Mirroring Sources; Solutions When The Image Or Sound Contains Static During Screen Mirroring Connection; Solving Network Problems - Epson ELPBU01 User Manual

Solving Network Problems

Solutions When You Cannot Connect Using Screen
Mirroring
If you are unable to connect to the base unit using Screen Mirroring, try the
following solutions:
• Check the base unit's settings.
• Set the Simple AP setting to On.
Network > Network Settings > Simple AP
s
• Set the Screen Mirroring setting to On.
Network > Network Settings > Network Projection > Screen
s
Mirroring
• Select the Screen Mirroring setting to Off and select On again.
Network > Network Settings > Network Projection > Screen
s
Mirroring
• Check the mobile device's settings.
• Make sure the settings on the mobile device are correct.
• When connecting again immediately after disconnecting, it may take
some time until the connection is established. Reconnect after waiting for
a while.
• Restart the mobile device.
• Once you have connected using Screen Mirroring, the base unit
connection information may be recorded on the mobile device. However,
you may not be able to reconnect to the base unit from the recorded
information. Select the base unit from the list of available devices.
g g Related Links
• "Network Menu - Network Settings Menu"
• "Network Menu - Network Projection Settings"
Solutions When You Cannot Use Two Screen
Mirroring Sources
If you are unable to use two Screen Mirroring sources at the same time, set
the Interrupt Connection setting to Off.
p.86
p.89
Network > Network Settings > Network Projection > Screen Mirroring
s
g g Related Links
• "Network Menu - Network Projection Settings"
Solutions When the Image or Sound Contains Static
During Screen Mirroring Connection
If the projected image or sound contains static when connecting using Screen
Mirroring, try the following solutions:
• Avoid covering the Wi-Fi antenna of the mobile device.
• If you use a Screen Mirroring connection and an internet connection at the
same time, the image may stop or contain noise. Disconnect the internet
connection to expand your wireless bandwidth and improve the connection
speed of the mobile device.
• Make sure the projection contents meet the Screen Mirroring requirements.
• Depending on the settings of the mobile device, the connection may be lost
when the device enters power saving mode. Check the electrical power
saving settings on the mobile device.
• Update to the latest version of the wireless driver or firmware on the mobile
device.
109
p.89