When mounting on the wall, install the base unit so that the interface ports face down. If it is installed facing up, dust could collect on the interface ports

and cause a fire or electric shock.

Do not install in a location beyond the operating temperature range of the base unit or the external display device being used.

To ensure good wireless performance, use the base unit and the wireless transmitter in a location that is not obstructed.

Do not install the base unit on the top (rear) of a projector suspended from the ceiling. Doing so may force the base unit to exceed the operating

temperature range or degrade the wireless performance.

Do not install the base unit behind a large display. Doing so may force the base unit to exceed the operating temperature range or degrade the wireless

performance.

When installing the base unit near the projector, install it in a location where it will not be exposed to the projector's exhaust.

To prevent the AC adapter from falling, install the AC adapter cover on the wall.

See the "Epson Wireless Presentation System User's Guide" for notes on the AC adapter.

Base Unit Installation Examples

Placed on a table

Mounted on a ceiling

Mounted on a wall

Table of Contents