Philips EM6E Service Manual page 104

Menu-item Subjects
Audio Repro Dolby
Rear speakers
Subwoofer present
Acoustic system
AVL
Source Selection AV3 2fH (2002)
AV4 2fH (2002)
EXT3 2fH (2003)
EXT4 2fH (2003)
Miscellaneous Home Cinema
Integrated RC
Tuner type
Integrated Radio
P50 DVD menu line
Option no. Group 1
Group 2
8.4.3
OPT. NO. (Option numbers)
Select this SERVICE OPTIONS sub menu, to set all options at
once (expressed in two long strings of numbers).
An option number (or "option byte") represents a number of
different options. When you change these numbers directly,
you can set all options very quickly. All options are controlled
via eight option numbers.
When the EAROM is replaced, all options will require resetting.
To be certain that the factory settings are reproduced exactly,
you must set both option number lines. You can find the correct
option numbers on the CRT sticker inside the TV set.
Example: The CRT sticker gives the following option numbers:
•
04187 08270 49936 00513
•
04118 00001 00001 00326
The first line (group 1) indicates options 1 to 4, the second line
(group 2) options 5 to 8 (see tables below).
Every 5-digit number represents 16 bits (so the maximum
number will be 65536 if all options are set).
When all the correct options are set, the sum of the decimal
values of each Option Byte (OB) will give the option number.
Service tip: An easy way to check the option numbers is:
1. Convert the decimal option number (as given on the CRT
sticker) to a binary number (e.g. by means of the 'scientific'
calculator that comes with MS Windows™). E.g. OB4=
00513 (dec)= 000000100000001 (bin)
Electrical Alignments
Options
None
Pro Logic
Virtual
Speakerless
Cordless
Yes
No
None,
FL9-DAS,
FL11,
FL12,
PV02,
FL13,
Soft Designline,
Tech Designline.
On
Off
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
UV1316
TEDE9
Yes
No
Yes
No
EM6E AB
Description
Set without Dolby.
Set with Dolby ProLogic.
Sets with Virtual Dolby
Virtual Dolby (without rear speakers).
Wireless active surroundbox present.
Feature present.
Feature not present.
Automatic Volume Limiter available in user menu.
Automatic Volume Limiter available in user menu.
Not selectable yet
Feature not present.
Not selectable yet
Feature not present.
Feature present.
Feature not present.
Not selectable for this chassis
Feature not present.
Set with Home Cinema Link (EU only)
Set without Home Cinema Link
Feature present.
Feature not present.
Set with Philips tuner.
Set with Alps tuner.
Feature present.
Feature not present.
Feature present (only in sets with Home Cinema).
Feature not present.
Group 1 option code overview (see CRT sticker).
Group 2 option code overview (see CRT sticker).
2. Use this binary number to check against the bits as
mentioned in the tables below. This means in above-
mentioned sample, that Bit 0 en Bit 9 are "1" (means "set"),
and that the rest is "0". So, actually this means that the
options "PIP/Aux Tuner" (Bit 0) and "Integrated Hard disk"
(Bit 9) are set for this particular model.
8. EN 143