Table of Contents
Advertisement
Programming radio stations
You can store up to a total of 50 radio stations.
Give name
&
Automatic programming
Press the ® key on the remote control for
about 3 seconds.
SEARCH
is displayed and all
é
the available stations are programmed
(overriding all former programmed radio
stations).The system will store first the RDS
"
stations with a strong enough signal, then the
RDS stations with a weaker signal and finally
the non RDS stations.
'
Note:
Note: To erase a station name:
- to stop the automatic installation, press the ‡ key.
All stations before the stop, are stored into the
memory.
Manual programming
Briefly press the ® key on the remote control.
&
The current station number starts flashing and
the station name, in case of a RDS station, or
the tuned frequency is displayed.
Hold down the Ò or † key to start the
é
search for a new radio station.The search will
stop on the next radio station and display the
tuned frequency which will eventually be
replaced by the detected RDS name.
Note: briefly and repeatedly press the Ò or †
key to fine tune the frequency if necessary.
"
Use the
P
- or
+
key or the digit keys to select
the station number where you want to store
the new radio station.
Press the ® key to store the new radio
'
station on the selected station number.
(
&
'
Repeat
to
to store another radio
station.
Note: To stop the manually installation, press the ‡
key. Nothing is stored and everything is restored to
the radio status just before entering the manual
installation mode.
22
Select the station number of the radio station
you want to assign a name (for stations without
RDS reception) or to change the name.
Press and hold the b key on the remote
control for about 3 seconds.The cursor flashes
on the first of 8 characters.
Press the cursor up/down to change the
character.
Press the
key to confirm the new name.
OK
- Select the station number you want to erase the
name of.
- Press and hold the b key for about 3 seconds.
- Press and hold the ‡ key for about 3 seconds.
- The message
appears and the RDS
DELETED
name or the frequency is displayed.
DVD/Audio CD function keys
When in DVD mode
Note: Remote control info is not available
To reduce energy consumption, it may take some time for the DVD player to become active.
Cursor keys
B
• Press cursor up to freeze the
picture. Press again to move to the
VCR DVD SAT AMP CD
next frame.
• Press cursor down repeatedly to
slow play down to 1/2, 1/4 or 1/8
v
Select
speed.
• Press cursor left/right repeatedly
Ò
‡
to fast rewind/forward at x4 or
x32 speed.
æ
º/S
Freeze - Frame
®
º
Press
or the cursor up to
freeze the picture. Press again to
OK
®
move to the next frame.
Pause playback in case of an
®
audio CD.
S
º
i
Press to display information
about the current disc.
+
DVD
V
¬
Press repeatedly to switch to
-
dvd mode.
DISC
1
2
Press to summon the menu of
the DVD disc.
4
5
Its contents are entirely
dependent on the DVD disc. It
7
8
allows access to different
sections such as choice of
i
0
language, direct access to scenes,
bonus materials, etc. Use the
Active Control
cursor keys to navigate through
b
h
the menu and press the
OK
key
to confirm.
U
Q
In case of a picture CD, 4
DVD
DISC
PLAYER
pictures are displayed at once.
RADIO
MENU
SET UP
Press the
-P+
keys to display a
previous/next series of pictures.
Select a picture with the cursor
keys and press the
OK
key to
display a picture full screen.
PLAYER/SETUP
DVD setup menu, p. 25
LCD
Automatic LCD tilt on/off.
π Play
Once a disc is loaded, playback
starts automatically. Certain discs
may ask you to make a selection
from a menu.
π
Press
to resume play after
freezing the picture, stopping
playback, switching to standby or
ejecting the disc.
π
Press
to start playback of an
†
audio CD or picture CD. Press
Ì
again to start a slide show in
π
case of a picture CD.
Note: When temporarily switching
b
to TV mode, and switching back to
DVD mode within 10 minutes, the
DVD will automatically resume.
®
‡ Stop playback
The default screen appears and
gives information on the player
MENU
status.
Ò † Fast forward and
+
rewind
P
Press (or the cursor left/right) to
-
fast forward or rewind at x4 or
x32 speed or x8 speed in case of
π
an audio CD. Press
to return
3
to normal speed.
6
P
Press to go to the previous or
9
next chapter in case of a DVD,
the previous or next track in
T/C
0
case of an audio CD, the previous
or next picture in case of a
picture CD.
q
T/C
Title/Chapter
DVD discs are divided into
different chapters to allow
LCD
certain scenes to be accessed
directly. Press the
T/C
key to
access the Title or Chapter menu
directly.
23
Advertisement
Table of Contents
