KidKraft Cedar Summit Bancroft Playhouse Installation And Operating Instructions Manual page 49

Step 20: Attach Door Bell Assembly
Note: Install 2 AAA/LR03 batteries in Doorbell 2 prior to attaching to assembly. To replace batteries
remove back cover on Doorbell 2, remove both batteries, insert 2 new batteries ensuring the proper
polarity is observed then replace back cover.
A: From inside the assembly attach Doorbell to (0575) Right Front Wall with 2 (S10) #8 x 1" Pan Screws. (fig.
20.1 and 20.3)
B: On the outside of the assembly attach Doorbell Trim to (0575) Right Front Wall with 2 (S13) #6 x 5/8" Pan
Screw, as shown in fig. 20.1 and 20.2.
Fig. 20.2
S13
Fig. 20.1
0575
Doorbell Trim
Hardware
2 x S10 #8 x 1" Pan Screw
2 x #6 x 5/8" Pan Screw
S13
Note:
•
•
•
•
S10
Doorbell
49
Use only AAA/LR03
batteries (not included)
Always replace the whole
set of batteries at one
time, taking care not to
mix old and new batteries.
Do not mix batteries
of a differnt type such
as, alkaline, standard
(carbonized) or
rechargeable (nickel-
cadmium batteries)
Remove batteries if
consumed or if product is
to be left unused for long
periods of time.
Fig. 20.3
Inside View
Other Parts
1 x Doorbell
1 x Doorbell Trim