KidKraft Cedar Summit Bancroft Playhouse Installation And Operating Instructions Manual page 36

Step 13: Window Wall Shutter Assembly
Part 3
F: Attach 1 (0336) Window Trim to each side of the opening in (0324) Shutter Wall Panel using 3 (TS) #6 x 30 mm
Trim Screws per board. Notice the pilot holes are towards the inside of the assembly. (fig. 13.9 and 13.10)
G: Place (0333) Shutter Stop tight to top of (0396) Shutter Bottom and tight to the panel then attach to (0396)
Shutter Bottom using 3 (TS) #6 x 30 mm Trim Screws. (fig. 13.10)
Fig. 13.10
0324
Tight to Panel
Wood Parts
2 x Window Trim 3/8 x 1 x 16-5/16"
0336
1 x Shutter Stop 5/8 x 1 x 13"
0333
0336
Note: Hole orientation
9 x
Fig. 13.9
0336
(hidden)
Flush
TS
x 9
0333
0396
Hardware
#6 x 30 mm Trim Screw
TS
36