KidKraft Cedar Summit Bancroft Playhouse Installation And Operating Instructions Manual page 26

Step 8: Soffit Assembly
A: Mark the centre point of both (0372) Top Front Panel and (0370) Top Back Panel. (fig. 8.1)
B: Place 2 (0376) Soffit Wides tight together on top of (0372) Top Front Panel so the inside edges line up with the
marked out spot from Step A. Use the pilot holes that are towards the inside of the assembly. Remaining holes
will be used in the next step. Attach (0376) Soffit Wides to (0372) Top Front Panel and both (0369) Corner Trims
with 4 (S2) #8 x 1-1/2" Wood Screws per board. (fig. 8.1)
C: Repeat Step B to attach 2 (0376) Soffit Wides to (0370) Top Back Panel. (fig. 8.1)
Fig. 8.1
Note: End holes not
used in this step.
0369
Flush
Wood Parts
4 x Soffit Wide 1/2 x 4-1/4 x 26-3/16"
0376
Front Wall
0372
0369
16 x
S2
S2
x 4 per board
0369
0376
Hardware
#8 x 1-1/2" Wood Screw
26
(hidden)
Back Wall
0370
0369
Centre