KidKraft Cedar Summit Bancroft Playhouse Installation And Operating Instructions Manual page 23

Step 5: Window Wall Assembly
A: Place (0324) Shutter Wall Panel tight to (0369) Corner Trim on (0322) Front Left Wall so the inside board is
flush to the inside edge of (0369) Corner Trim. Attach (0369) Corner Trim to (0324) Shutter Wall Panel with 5
(S26) #8 x 2" Pan Screws. (fig. 5.1)
B: Place (0374) Top Side Panel on top of (0324) Shutter Wall Panel so the inside edges are flush. Notice the
middle pilot holes are towards the bottom of the board. Attach (0369) Corner Trim to (0374) Top Side Panel with 2
(S26) #8 x 2" Pan Screws. (fig. 5.1)
C: Flush to the inside edges of the (0324) Shutter Wall Panel and (0374) Top Side Panel attach 1 (0369) Corner
Trim with 7 (S26) #8 x 2" Pan Screws. (fig 5.1)
Fig. 5.1
x 7
S26
Flush
Wood Parts
1 x Corner Trim 1-1/8 x 1-1/8 x 44"
0369
1 x Shutter Wall Panel 1-1/8 x 40 x 42-1/4"
0324
1 x Top Side Panel 1-1/8 x 4 x 42-1/4"
0374
Notice hole location.
0374
0324
Hardware
14 x #8 x 2" Pan Screw
S26
23
Flush
x 7
S26
0322
0369