Powering Up And Down; Setting The Temperature; Interior Light - Thermo Scientific Heratherm IMC 18 Operating Instructions Manual

Handling and control

Powering up and down

Powering up and down
Switch the Heratherm Incubator IMC 18 on by pressing button
The display
To switch off the Heratherm Incubator IMC 18, press button
switches itself off and the display goes out.

Setting the temperature

You can preselect temperatures between 15 °C and 40 °C (+59 °F and +104 °F). The thermal output
and cooling capacity can be influenced by:
• the ambient temperature,
• the number of samples which are to be heated up or cooled down,
• the frequency with which the door is opened.
Press button
time or press button
time.
The display

Interior light

If you wish to turn the interior light on or off, press the
7-2 Heratherm IMC 18
(Fig. 7-1; 5) is activated and shows the current useable space temperature.
(Fig. 7-1; 3), in order to reduce the required temperature by 1 °C (33.8 °F) each
(Fig. 7-1; 2), in order to increase the temperature by 1 °C (33.8 °F) each
(Fig. 7-1; 1) shows the set required temperature when you press button.
(Fig. 7-1; 5).
(Fig. 7-1; 5) again. The device
(Fig. 7-1; 4) button.
Thermo Scientific