Installation And Service Connections; Installation Instructions - Blodgett BLT-30E Installation Operation & Maintenance

Blt-e series electric floor model braising pan with manual tilt

Hide thumbs Also See for BLT-30E:

INSTALLATION AND SERVICE CONNECTIONS

Set braising pan in place, level appliance using spirit level. Mark hole locations on floor

through anchoring holes provided in flanged adjustable feet.

Remove appliance and drill holes in locations marked on floor and insert proper

anchoring devices.

Re-level the appliance, leveling the unit left to right and front to back.

Bolt and anchor appliance securely to the floor. Seal bolts and flanged feet with Silastic

or equivalent compound.

SERVICE CONNECTIONS

All internal wiring for the skillet is complete.

Make service connections as indicated on page 4.

This must be a waterproof connection from incoming lines.

Ground skillet to terminal provided in control housing. A wiring diagram is provided and

is located inside the control cover panel.

If faucet is provided connect water supply and check for proper operation.

Table of Contents

Blt-40e