Troubleshooting; Periodic Maintenance - Blodgett BLT-30E Installation Operation & Maintenance

Blt-e series electric floor model braising pan with manual tilt

Hide thumbs Also See for BLT-30E:

5.0 TROUBLESHOOTING

Unit will not operate:

1. Power supply not "ON".

2. Pan not in down position.

3. Defective thermostat or elements.

Pan difficult to tilt:

1. Unit not level.

2. Thrust bearings worn out.

3. Dirt in bearings causing it to bind.

4. Shaft bent.

1. Grease pivot bearings via lubricating nipple as required. Use Petro-Canada type 0G-

2 or equivalent.

2. Check that screws in element terminals are not loose. Loose connections may

cause arcing and burn off connection causing element failure.

Table of Contents

Blt-40e