Valor G4 Series Installation And Operating Instructions Manual page 4

Access for servicing—780 fireplace
WARNING
DO NOT TOUCH THE FIREPLACE WHILE IT IS
HOT! Let it cool first before any maintenance.
Before carrying out any maintenance, make sure the
fireplace is turned off including the pilot.
MAKE SURE THE FIREPLACE IS COLD!
1.
Access the fan.
Window, logs, rocks,
ceramic walls
Remove for maintenance—780
a) Remove the front, trim, and other accessory
necessary to have access to the gas valve
on the left hand side of the appliance and the
window. See the instruction manual supplied
with the 780 appliance.
b) Below the gas valve, turn the switch off (O) so
the fireplace does not start accidentally.
c) Remove the window, the ceramic rocks or logs,
and the grate (logs only).
d) Remove the rear log support (3 screws).
4
Fan access panel
Air baffle
Front brick support
Rear log support
e) Remove the front log support.
f) Remove the ceramic walls.
g) Remove the air baffle on the rear wall (6
screws).
h) Remove the fan access panel on the rear wall
(12 screws).