Deutschmann Automation GmbH & Co. KG
Hardware design
®
Version 2: Use of UNIGATE
IC for digital or analog I/O-modules
Here only the synchronous serial interface is used, the asynchronous serial interface is basically
of no account. If you want to program the script in your completed application, then the use of a
connector for the asynchronous interface is recommended. With it you can carry out the ISP-pro-
gramming.
For this operating mode no additional controller is required on your application!
®
27.11.20
Instruction manual UNIGATE
IC - PROFINET 1Port V. 3.4
17
Need help?
Do you have a question about the UNIGATE IC-PROFINET and is the answer not in the manual?