YASKAWA V1000 Installation Manual page 46

10 Web Interface
Network Monitor
Msg Tx OK
Msg Rx OK
Current Connections
Msg Tx Dropped
Msg Rx Dropped
Collisions
Msg Tx Errors
Msg Rx Errors
Tx Retry
Originator IP Address
Time out Multiplier
O2T_RPI
O2T_API
Consume Msg Cnt
T20_RPI
T20_API
Produce Msg Cnt
Reset Statistics
Connection1
Note: Network monitors are reset when the power supply is cycled.
46
Table 11 Network Monitor Explanations
Cumulative number of messages transmit successfully from the option.
Cumulative number of messages received successfully to the option.
Current number of open connections.
Cumulative number of messages dropped due to output network buffer being full and
unable to hold the new message.
Cumulative number of messages dropped due to input network buffer being full and
unable to hold the new message.
Cumulative number of collisions.
Cumulative number of transmit errors.
Cumulative number of receive errors.
Cumulative number of transmit errors.
The IP address of the network node making this connection.
The value here specifies the multiplier applied to the expected packet rate (API) to obtain
the value used by the inactivity timer for this connection.
Originator to Target (ie, PLC to SI-EN3/V) Requested Packet Interval for I/O messaging,
in milliseconds, for this connection.
Originator to Target (ie, PLC to SI-EN3/V) Actual Packet Interval for I/O messaging, in
milliseconds, for this connection.
Number of I/O messages consumed (ie, received) from the SI-EN3/V since the
connection was established or statistics were reset for this connection.
Target to Originator (ie, SI-EN3/V to PLC) Requested Packet Interval for I/O messaging,
in milliseconds, for this connection.
Target to Originator (ie, SI-EN3/V to PLC) Actual Packet Interval for I/O messages, in
milliseconds, for this connection.
Number of IO messages produced (ie, transmit) from the SI-EN3/V since the connection
was established or statistics were reset for this connection.
Clicking this resets the Consume Msg Cnt and the Produce Msg Cnt for this connection
to start counting from zero.
YASKAWA ELECTRIC TOBP C730600 60C V1000 Option SI-EN3/V Installation Manual
Explanation