YASKAWA V1000 Installation Manual page 35

No.
Name
(Addr. Hex)
F7-11
(3EF)
Gateway Address 3
<5>
F7-12
(3F0)
Gateway Address 4
<5>
F7-13
Address Mode at
(3F1)
Startup
F7-14 Duplex Mode
(3F2) Selection
F7-15
Communication Speed
(3F3)
Selection
<7>
F7-17 EtherNet/IP Speed
(3F5) Scaling Factor
F7-18 EtherNet/IP Current
(3F6) Scaling Factor
F7-19 EtherNet/IP Torque
(3F7) Scaling Factor
F7-20 EtherNet/IP Power
(3F8) Scaling Factor
F7-21 EtherNet/IP Voltage
(3F9) Scaling Factor
F7-22 EtherNet/IP Time
(3FA) Scaling
YASKAWA ELECTRIC TOBP C730600 60C V1000 Option SI-EN3/V Installation Manual
Description
Sets the static/fixed Gateway address.
Parameter F7-11 sets the third most significant octet.
Sets the static/fixed Gateway address.
Parameter F7-12 sets the fourth most significant octet.
Selects how the option address is set.
0: Static
1: BOOTP
2: DHCP
Selects duplex mode setting.
0: Auto/Auto
1: Half/Half
2: Full/Full
3: Half/Auto
4: Half/Full
5: Auto/Half
6: Auto/Full
7: Full/Half
8: Full/Auto
Sets the communication speed
0: 10 Mbps (Available only with drive software version
PRG: 1012 to 1015)
10: 10 Mbps
100: 100 Mbps
Sets the scaling factor for the speed monitor in EtherNet/IP
Class ID 2AH Object.
Sets the scaling factor for the output current monitor in
EtherNet/IP Class ID 2AH Object.
Sets the scaling factor for the torque monitor in EtherNet/
IP Class ID 2AH Object.
Sets the scaling factor for the power monitor in EtherNet/
IP Class ID 2AH Object.
Sets the scaling factor for the voltage monitor in EtherNet/
IP Class ID 2AH Object.
Sets the scaling factor for the time monitor in EtherNet/IP
Class ID 2AH Object.
6 Related Drive Parameters
Values
Default: 1
Min: 0
Max: 255
Default: 1
Min: 0
Max: 255
Default: 2
Range: 0 to 2
Default:
<6>
Range: 0 to 8
Default:
<8>
Range:
<8>
Default: 0
Min.: -15
Max.: 15
Default: 0
Min.: -15
Max.: 15
Default: 0
Min.: -15
Max.: 15
Default: 0
Min.: -15
Max.: 15
Default: 0
Min.: -15
Max.: 15
Default: 0
Min.: -15
Max.: 15
35