YASKAWA V1000 Installation Manual page 22

5 Installation Procedure
4.
On IP20/Open-Chassis models, connect the drive side of the ground wire to the
drive ground terminal.
Note: The four different ground wires packaged with the option connect the option to different drive
models. Select the proper ground wire depending on drive size. Refer to
selection by drive model.
Figure 7
V1000
Figure 7 Connect the Ground Wire on an IP20/Open-Chassis Drive
Ground Wire
Length
(mm/in)
150/5.9
200/7.9
250/9.8
400/15.7
22
Ground terminal
Ground wire
Table 7 Ground Wire Selection
Single-Phase
200 V Class
BA0001
BA0002
BA0003
BA0006
BA0010
BA0012
BA0018
–
–
YASKAWA ELECTRIC TOBP C730600 60C V1000 Option SI-EN3/V Installation Manual
Option unit
connector
Screw size: M3
Ground wire
Drive Model
CIMR-V
Three-Phase
200 V Class
2A0001
2A0002
2A0004
2A0006
2A0010
2A0012
2A0020
2A0030
2A0040
2A0056
2A0069
Table 7 for ground wire
Drive-side
connector
Screw size:
M3.5 to M6
Three-Phase
400 V Class
–
4A0001
4A0002
4A0004
4A0005
4A0007
4A0009
4A0011
4A0018
4A0023
4A0031
4A0038