Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Configuring Wired WAN Connection
This configuration step is available for the Fiber (SFP), Router, and WISP Repeater modes.
You should configure your WAN connection in accordance with data provided by your
!
Internet service provider (ISP). Make sure that you have obtained all necessary information
prior to configuring your connection. Otherwise contact your ISP.
1. On the Internet connection type page, click the SCAN button (available for the Fiber
(SFP) mode only) to automatically specify the connection type used by your ISP or
manually select the needed value from the Connection type list.
2. Specify the settings necessary for the connection of the selected type.
3.
If your ISP uses MAC address binding, select the Clone MAC address of your device
checkbox.
4.
If the Internet access is provided via a VLAN channel, select the Use VLAN checkbox and
fill in the VLAN ID field.
Click the NEXT button to continue or click the BACK button to return to the previous page.
5.
Page 63 of 311
Configuring via Web-based Interface
Advertisement
Table of Contents
