Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Access Point or Repeater
In order to connect your device to a wired router for adding a wireless network to the existing local
network, on the Device mode page, from the Connection method list, select the Ethernet
(LAN) value. Then from the Work mode list select the Access point value. In this mode you
can change the LAN IP address, set your own settings for the wireless network in the 2.4GHz and
5GHz bands and set your own password for access to the web-based interface of the device.
Figure 38. Selecting an operation mode. The Access point mode.
In order to connect your device to a wireless router for extending the range of the existing wireless
network, on the Device mode page, from the Connection method list, select the Wi-Fi value.
Then from the Work mode list select the Repeater value. In this mode you can change the LAN
IP address, connect your device to another access point, set your own settings for the wireless
network in the 2.4GHz and 5GHz bands, and set your own password for access to the web-based
interface of the device.
Figure 39. Selecting an operation mode. The Repeater mode.
Page 55 of 311
Configuring via Web-based Interface
Advertisement
Table of Contents
