D-Link DVG-5402G User Manual page 136

Wireless ac1200 mu-mimo dual band gigabit router with fiber wan port, 3g/lte support, 2 fxs ports, and usb port
Hide thumbs Also See for DVG-5402G:
Table of Contents

Advertisement

DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Parameter
Hashing algorithm
First phase DHgroup
type
IKE-SA lifetime
IKE version
Encryption mode
Second phase
encryption algorithm
Hashing mode
Size of hash
Hashing algorithm
Enable PFS
Second phase
DHgroup type
IPsec-SA lifetime
To specify IP addresses of local and remote subnets for this tunnel, click the ADD button (
the Tunneled Networks section.
If the IPsec tunnel operates over IKEv1 (1 is selected from the IKE version list in the The First
Phase section), you can create only one subnet.
Select a hashing algorithm from the drop-down list.
A Diffie-Hellman key group for Phase 1. Select a value from the drop-
down list.
The lifetime of IKE-SA keys in seconds. After the specified period it is
required to renegotiate the keys. The value specified in this field
should be greater than the value specified in the IPsec-SA lifetime
field.
IKE (Internet Key Exchange) is a protocol of keys exchange between
two hosts of VPN connections. Select a version of the protocol from
the drop-down list.
The Second Phase
Select an encryption mode from the drop-down list.
Select an available encryption algorithm from the drop-down list.
Select a hashing mode from the drop-down list.
The length of the hash in bits.
Select a hashing algorithm from the drop-down list.
Move the switch to the right to enable the PFS option (Perfect
Forward Secrecy). If the switch is moved to the right, a new
encryption key exchange will be used for Phase 2. This option
enhances the security level of data transfer, but increases the load on
DVG-5402G/GF.
A Diffie-Hellman key group for Phase 2. Select a value from the drop-
down list. The drop-down list is available if the Enable PFS switch
is moved to the right.
The lifetime of Phase 2 keys in seconds. After the specified period it is
required to renegotiate the keys. The value specified in this field
should be greater than zero.
Page 136 of 311
Configuring via Web-based Interface
Description
) in

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvg-5402gf

Table of Contents