Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Parameter
Address
Port
Use domain to register
SIP domain name
Local RTP port
(minimum/maximum)
DNS Interface
Also on this page, you can specify incoming/outgoing call settings for the SIP lines.
Figure 183. The VoIP / Profile Name / Basic Settings. The List of SIP Lines section.
To change parameters of a SIP line, select the relevant line in the table.
Backup SIP outbound proxy
An IP or URL address of the backup SIP outbound proxy server. The
router uses the backup SIP outbound proxy server in case of no
response from the main SIP outbound proxy server.
A port of the backup SIP outbound proxy server. Unless another
setting is given by your ISP, it is recommended to leave the default
value (5060).
SIP Domain
Move the switch to the right if your ISP requires to specify a domain
name upon registration on the SIP proxy server. Then fill in the SIP
domain name field.
When this field is filled in, the router registers on the SIP proxy
server using the specified domain name. When the field is blank, the
router uses the IP address assigned to it.
Misc
A range of ports for voice traffic receipt/transfer via RTP. Unless
another setting is given by your ISP, it is recommended to leave the
default value (9000 and 9010).
Select the interface which will be used for domain name resolution
in VoIP. Leave the Follow VoIP value if changing the interface for
domain name resolution is not required.
Page 235 of 311
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
