Configuring Via Web-Based Interface; Initial Configuration Wizard - D-Link DVG-5402G User Manual

DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
CHAPTER 4.
INTERFACE

Initial Configuration Wizard

To start the Initial Configuration Wizard, go to the Initial Configuration section. On the opened
page, click the OK button and wait until the factory default settings are restored.
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you
are connected to the wireless network of DVG-5402G/GF (see the WLAN name (SSID) on the
barcode label on the bottom panel of the device) and click the NEXT button.
Click the START button.
CONFIGURING
Figure 29. Restoring the default settings in the Wizard.
Figure 30. Checking connection to the wireless network.
Figure 31. Starting the Wizard.
Page 50 of 311

Configuring via Web-based Interface

VIA WEB-BASED