D-Link DVG-5402G User Manual page 18

DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
LED
LAN 1-4
WLAN 2.4G
WLAN 5G
WPS
USB
FXS 1-2
In case the Power, Internet, WPS, USB, and FXS 1-2 LEDs are blinking green at the same time,
the device is in the emergency mode. Power the device off and on. If the device is loaded in the
emergency mode again, restore the factory default settings via the hardware RESET button.
Mode
A device is connected to the port of the router (for the
LAN port configured as the WAN port: the router is
Solid green
connected to an Ethernet line).
Data transfer through the relevant LAN port.
Blinking green
The cable is not connected to the relevant port.
No light
The router's WLAN of the relevant band is on.
Solid green
Data transfer through the Wi-Fi network of the relevant
Blinking green
band.
The router's WLAN of the relevant band is off.
No light
Attempting to add a wireless device via the WPS
Blinking green
function.
The WPS function is not in use.
No light
A USB device is connected to the router's USB port.
Solid green
No USB device.
No light
The phone is registered on the SIP server.
Solid green
An attempt to register on the SIP server.
Blinking green
An incoming call or talking.
Fast blinking green
The phone is not registered on the SIP server, because
registration is disabled or the corresponding connection
No light
is off.
Page 18 of 311
Description
Overview