D-Link DVG-5402G User Manual page 140

DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Parameter
Remote IP
MTU
Allow traffic GRE →
LAN
Remote LAN IP address The IP address of the remote local subnet.
Remote LAN mask
Remote GRE interface
IP address
After configuring all needed settings, click the APPLY button.
To edit the parameters of an existing tunnel, in the Tunnels section, select the relevant tunnel in the
table. On the opened page, change the needed parameters and click the APPLY button.
To remove an existing tunnel, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
Enter the public IP address of the remote subnet VPN gateway.
The maximum size of units transmitted from the remote host to the
router.
Move the switch to the right to allow GRE tunnel users access
devices in the remote local subnet.
Static route settings
The mask of the remote local subnet.
The IP address of the GRE tunnel interface in the remote subnet.
).
Page 140 of 311
Configuring via Web-based Interface
Description