D-Link DVG-N5402SP User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. DVG-N5402SP
  6. User manual

D-Link DVG-N5402SP User Manual

Wireless router with 1 fxs port
Hide thumbs Also See for DVG-N5402SP:
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
DVG-N5402SP
Wireless Router with 1 FXS Port
October 2018

Advertisement

Table of Contents
loading

Related Manuals for D-Link DVG-N5402SP

Summary of Contents for D-Link DVG-N5402SP

  • Page 1 User Manual DVG-N5402SP Wireless Router with 1 FXS Port October 2018...

  • Page 2: Table Of Contents

    DVG-N5402SP Wireless Router with 1 FXS Port User Manual Contents Chapter 1. Introduction..........5 Contents and Audience............5 Conventions..............5 Document Structure............5 Chapter 2. Overview..........6 General Information............6 Specifications*.............7 Product Appearance............11 Front Panel..............11 Back Panel...............12 Delivery Package............13 Chapter 3. Installation and Connection......14 Before You Begin............14 Connecting to PC............15...
  • Page 3 DVG-N5402SP Wireless Router with 1 FXS Port User Manual Connections Setup............56 WAN..............56 Creating Dynamic IPv4 or Static IPv4 WAN Connection....58 Creating Dynamic IPv6 or Static IPv6 WAN Connection....62 Creating PPPoE WAN Connection..........66 Creating PPTP or L2TP WAN Connection........71 Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection....75 LAN..............81...
  • Page 4 DVG-N5402SP Wireless Router with 1 FXS Port User Manual System..............166 Configuration............167 Firmware Update............169 Local Update............170 Remote Update............171 Log..............172 Ping..............174 Traceroute..............176 Telnet..............178 System Time.............179 Yandex.DNS..............181 Settings..............181 Devices and Rules............183 Chapter 5. Operation Guidelines........185 Safety Rules and Conditions..........185 Wireless Installation Considerations........186 Chapter 6. Abbreviations and Acronyms......187...

  • Page 5: Chapter 1. Introduction

    Chapter 2 gives an overview of the router's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the router DVG-N5402SP and configure a PC in order to access its web-based interface. Chapter 4 describes all pages of the web-based interface in detail.

  • Page 6: Chapter 2. Overview

    The DVG-N5402SP device is a wireless VoIP router with FXS port and built-in 4-port switch. You are able to connect the VoIP router DVG-N5402SP to a cable or DSL modem or to a private Ethernet line and use a high-speed Internet connection to successfully fulfill a wide range of professional tasks.

  • Page 7: Specifications

    DVG-N5402SP Wireless Router with 1 FXS Port Overview User Manual Specifications Hardware Processor · BCM5358B0KFBG · 64MB, DDR2 SDRAM Flash · 16MB, SPI Interfaces · 10/100BASE-TX WAN port · 4 10/100BASE-TX LAN ports · FXS port LEDs · POWER ·...
  • Page 8 DVG-N5402SP Wireless Router with 1 FXS Port Overview User Manual Phone · Voice features Codecs: G.711 a/μ-law, G.729A, G.726, G.722 · DTMF detection and generation · In-band DTMF, out-of-band DTMF (RFC2833, SIP-INFO) · Comfort Noise Generation (CNG) · Voice Activity Detection (VAD) ·...
  • Page 9 DVG-N5402SP Wireless Router with 1 FXS Port Overview User Manual Software · Management Local and remote access to settings through TELNET/WEB (HTTP/HTTPS) · Bilingual web-based interface for configuration and management (Russian/English) · Notification on connection problems and auto redirect to settings ·...

  • Page 10: Operating Environment

    DVG-N5402SP Wireless Router with 1 FXS Port Overview User Manual Physical Parameters · Dimensions (L x W x H) 182 x 119 x 39 mm (7.2 x 4.7 x 1.5 in) Weight · 280 g (0.6 lb) Operating Environment ·...

  • Page 11: Product Appearance

    DVG-N5402SP Wireless Router with 1 FXS Port Overview User Manual Product Appearance Front Panel Figure 1. Front panel view. Mode Description The router is powered on. Solid green POWER The router is powered off. No light The connection is on.

  • Page 12: Back Panel

    DVG-N5402SP Wireless Router with 1 FXS Port Overview User Manual Back Panel Figure 2. Back panel view. Name Description FXS1 A port to connect an analog phone. A port to connect to a cable or DSL modem or to a private Ethernet line (it is recommended to use the cable included in the delivery package).

  • Page 13: Delivery Package

    • “Quick Installation Guide” (brochure). • The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.

  • Page 14: Chapter 3. Installation And Connection

    DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual CHAPTER 3. INSTALLATION AND CONNECTION Before You Begin Please, read this manual prior to installing the device. Make sure that you have all the necessary information and equipment.

  • Page 15: Connecting To Pc

    DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual Connecting to PC PC with Ethernet Adapter 1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
  • Page 16 DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line. Figure 4. The Network and Sharing Center window. Page 16 of 188...
  • Page 17 DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed. Figure 5. The Network Connections window. Page 17 of 188...
  • Page 18 DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button. Figure 6. The Local Area Connection Properties window.
  • Page 19 DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button. Figure 7. The Internet Protocol Version 4 (TCP/IPv4) Properties window.

  • Page 20: Pc With Wi-Fi Adapter

    DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual PC with Wi-Fi Adapter 1. Connect the phone cable between the FXS1 port of the router and the phone. 2. Connect the power cord to the power connector port on the back panel of the router, then plug the power adapter into an electrical outlet or power strip.
  • Page 21 DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line. 4. In the opened window, right-click the relevant Wireless Network Connection icon.
  • Page 22 DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual 9. In the opened Wireless Network Connection window, select the wireless network DVG- N5402 and click the Connect button. Figure 11. The list of available networks. 10. In the opened window, enter the network key (see WPS PIN on the barcode label on the bottom panel of the device) in the Security key field and click the OK button.

  • Page 23: Connecting To Web-Based Interface

    (create a WAN connection, change the parameters of the wireless network, configure VoIP, specify the settings of the firewall, etc.). For security reasons, DVG-N5402SP with default settings cannot connect to the Internet. To get started, please set your own password used to access the web-based interface and, if needed, configure other settings recommended by your ISP.
  • Page 24 DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.

  • Page 25: Web-Based Interface Structure

    DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual Web-based Interface Structure Summary Page On the Summary page, detailed information on the device state is displayed. Figure 15. The summary page. Page 25 of 188...
  • Page 26 DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual The Device Information section displays the model and hardware version of the router, the firmware version, and other data. To contact the technical support group (to send an e-mail), left-click the support e-mail address.

  • Page 27: Home Page

    DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual Home Page The Home page displays links to the most frequently used pages with device's settings. Figure 16. The Home page. Other settings of the router are available in the menu in the left part of the page.

  • Page 28: Menu Sections

    DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual Menu Sections To configure the router use the menu in the left part of the page. In the Initial Configuration section you can run the Initial Configuration Wizard. The Wizard...

  • Page 29: Notifications

    DVG-N5402SP Wireless Router with 1 FXS Port Installation and Connection User Manual Notifications The router's web-based interface displays notifications in the top right part of the page. Figure 17. The web-based interface notifications. Click the icon displaying the number of notifications to view the complete list and click the relevant button.

  • Page 30: Chapter 4. Configuring Via Web-Based Interface

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual CHAPTER 4. CONFIGURING WEB-BASED INTERFACE Initial Configuration Wizard To start the Initial Configuration Wizard, go to the Initial Configuration section. On the opened page, click the OK button and wait until the factory default settings are restored.
  • Page 31 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual You can finish the wizard earlier and go to the menu of the web-based interface. To do this, click the ADVANCED SETTINGS button. On the opened page, change the default settings: specify the administrator password in the Admin password and Password confirmation fields and the name of the wireless network in the Network name (SSID) field.

  • Page 32: Selecting Operation Mode

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Selecting Operation Mode In order to connect your device to a wired ISP, on the Device mode page, from the Connection method list, select the Wired connection value. In this mode you can configure a WAN connection, set your own settings for the wireless network, configure LAN ports to connect an STB or VoIP phone, and set your own password for access to the web-based interface of the device.

  • Page 33: Wi-Fi Client

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Wi-Fi Client This configuration step is available for the Wi-Fi mode. 1. On the Wi-Fi Сlient page, click the WIRELESS NETWORKS button and select the network to which you want to connect in the opened window. When you select a network, the Network name (SSID) and BSSID fields are filled in automatically.
  • Page 34 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Keys for WEP encryption. The router uses the key selected from the Encryption key Default key ID drop-down list. It is required to specify all the (1-4) fields.

  • Page 35: Creating Wan Connection

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Creating WAN Connection You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your connection.

  • Page 36: Static Ipv4 Connection

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Static IPv4 Connection Figure 25. The page for configuring Static IPv4 WAN connection. Fill in the following fields: IP address, Netmask, Gateway IP address, and DNS IP address.

  • Page 37: Static Ipv6 Connection

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Static IPv6 Connection Figure 26. The page for configuring Static IPv6 WAN connection. Fill in the following fields: IP address, Prefix, Gateway IP address, and DNS IP address.

  • Page 38: Pppoe, Ipv6 Pppoe, Pppoe Dual Stack, Pppoe + Dynamic Ip (Pppoe Dual Access) Connections

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual PPPoE, IPv6 PPPoE, PPPoE Dual Stack, PPPoE + Dynamic IP (PPPoE Dual Access) Connections Figure 27. The page for configuring PPPoE WAN connection. In the Username field enter the login and in the Password field enter the password provided by your ISP.

  • Page 39: Pppoe + Static Ip (Pppoe Dual Access) Connection

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual PPPoE + Static IP (PPPoE Dual Access) Connection Figure 28. The page for configuring PPPoE + Static IP (PPPoE Dual Access) WAN connection. In the Username field enter the login and in the Password field enter the password provided by your ISP.

  • Page 40: Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Connection

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual PPTP + Dynamic IP or L2TP + Dynamic IP Connection Figure 29. The page for configuring PPTP + Dynamic IP WAN connection. In the Username field enter the login and in the Password field enter the password provided by your ISP.

  • Page 41: Pptp + Static Ip Or L2Tp + Static Ip Connection

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual PPTP + Static IP or L2TP + Static IP Connection Figure 30. The page for configuring PPTP + Static IP WAN connection. In the Username field enter the login and in the Password field enter the password provided by your ISP.

  • Page 42: Configuring Wireless Network

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Configuring Wireless Network 1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own name for the wireless network or leave the value suggested by the router.

  • Page 43: Configuring Lan Ports For Iptv/Voip

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Configuring LAN Ports for IPTV/VoIP On the IPTV page, select the Is an STB connected to the device checkbox. Figure 33. The page for selecting a LAN port to connect an IPTV set-top box.
  • Page 44 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual On the VoIP page, select the Is an IP phone connected to the device checkbox. Figure 34. The page for selecting a LAN port to connect an VoIP phone.

  • Page 45: Changing Web-Based Interface Password

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Changing Web-based Interface Password On this page, you should change the default administrator password. To do this, enter a new password in the Admin password and Password confirmation fields. You may set any password except admin.
  • Page 46 If problems of connection have not been solved, contact the technical support of your ISP (as a rule, the technical support phone is provided with the agreement) or the D-Link technical support (the phone number is displayed on the Summary page).

  • Page 47: Connection Of Multimedia Devices

    The Multimedia Devices Connection Wizard helps to configure LAN ports or available wireless interfaces of the router for connecting additional devices, for example, an IPTV set-top box or IP phone. Contact your ISP to clarify if you need to configure DVG-N5402SP in order to use these devices.
  • Page 48 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual If you need to configure a connection via VLAN, click the ADVANCED MODE button. Figure 38. The Multimedia Devices Connection Wizard. The advanced mode. In the WAN section, click the Add icon Figure 39.
  • Page 49 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Then in the LAN section, from the Bridged with drop-down list of the element corresponding to the LAN port or wireless interface to which the additional device is connected, select the created connection.

  • Page 50: Statistics

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Statistics The pages of this section display data on the current state of the router: network statistics • IP addresses leased by the DHCP server • the routing table •...

  • Page 51: Dhcp

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual DHCP The Statistics / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as well as the IP address expiration periods (the lease time).

  • Page 52: Routing Table

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Routing Table The Statistics / Routing Table page displays the information on routes. The table contains destination IP addresses, gateways, subnet masks, and other data. Figure 42. The Statistics / Routing Table page.

  • Page 53: Clients

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Clients On the Statistics / Clients page, you can view the list of devices connected to the local network of the router. Figure 43. The Statistics / Clients page.

  • Page 54: Multicast Groups

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Multicast Groups The Statistics / Multicast Groups page displays addresses of active multicast groups (including IPTV channels and groups for transferring service information) to which the device is subscribed, and the interface through which the device is subscribed.

  • Page 55: Clients And Session

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Clients and Session On the Statistics / Clients and Session page, you can view information on current sessions in the router's network. For each session the following data are displayed: the protocol for network packet transmission, the source IP address and port, and the destination IP address and port.

  • Page 56: Connections Setup

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Connections Setup In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection). On the Connections Setup / WAN page, you can create and edit connections used by the router.
  • Page 57 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 47. The Connections Setup / WAN page. The advanced mode. To create a new connection, click the ADD button ( ) in the Connections List section. Upon that the connection creation page opens.

  • Page 58: Creating Dynamic Ipv4 Or Static Ipv4 Wan Connection

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Creating Dynamic IPv4 or Static IPv4 WAN Connection On the connection creation page, go to the All Settings tab. Then select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 59 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 49. The page for creating a new Static IPv4 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
  • Page 60 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 50. The page for creating a new Static IPv4 connection. The IPv4 section. Parameter Description IPv4 For Static IPv4 type IP address Enter an IP address for this WAN connection.
  • Page 61 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 51. The page for creating a new Static IPv4 connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, the network address translation function is enabled.

  • Page 62: Creating Dynamic Ipv6 Or Static Ipv6 Wan Connection

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Creating Dynamic IPv6 or Static IPv6 WAN Connection On the connection creation page, go to the All Settings tab. Then select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 63 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 53. The page for creating a new Static IPv6 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
  • Page 64 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 54. The page for creating a new Static IPv6 connection. The IPv6 section. Parameter Description IPv6 For Static IPv6 type IPv6 Address Enter an IPv6 address for this WAN connection.
  • Page 65 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 55. The page for creating a new Static IPv6 connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, protection against external...

  • Page 66: Creating Pppoe Wan Connection

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Creating PPPoE WAN Connection On the connection creation page, go to the All Settings tab. Then select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 67 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 57. The page for creating a new PPPoE connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding. In the field, enter the MAC address registered by your ISP upon concluding the agreement.
  • Page 68 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 58. The page for creating a new PPPoE connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
  • Page 69 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right if you want the router to keep you connected to your ISP even when the connection has been inactive Keep Alive for a specified period of time.
  • Page 70 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 59. The page for creating a new PPPoE connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, the network address translation function is enabled.

  • Page 71: Creating Pptp Or L2Tp Wan Connection

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Creating PPTP or L2TP WAN Connection On the connection creation page, go to the All Settings tab. Then select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 72 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 61. The page for creating a new PPTP connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
  • Page 73 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied. • MPPE 40/128 bit: MPPE encryption with a 40-bit or 128- •...
  • Page 74 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 62. The page for creating a new PPTP connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, the network address translation function is enabled.

  • Page 75: Creating Pppoe Ipv6 Or Pppoe Dual Stack Wan Connection

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection On the connection creation page, go to the All Settings tab. Then select the relevant value from the Connection Type drop-down list and specify the needed values.
  • Page 76 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 64. The page for creating a new PPPoE IPv6 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
  • Page 77 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 65. The page for creating a new PPPoE IPv6 connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
  • Page 78 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right if you want the router to establish connection to the Internet on demand. In the Maximum idle time Dial on demand field, specify a period of inactivity (in seconds) after which the connection should be terminated.
  • Page 79 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 66. The page for creating a new PPPoE Pv6 connection. The IP section. Parameter Description Select a method for IPv6 address assignment from the drop-down Get IPv6 list or leave the Automatically value.
  • Page 80 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 67. The page for creating a new PPPoE IPv6 connection. The Miscellaneous section. Parameter Description Miscellaneous For the PPPoE Dual Stack type only. If the switch is moved to the right, the network address translation function is enabled.

  • Page 81: Lan

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual To configure the router's local interface, go to the Connections Setup / LAN page. IPv4 Go to the IPv4 tab to change IPv4 address, configure the built-in DHCP server, or specify MAC address and IP address pairs.
  • Page 82 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Dynamic IP Addresses An operating mode of the router's DHCP server. Disable: the router's DHCP server is disabled, clients' IP addresses are assigned manually. DHCP server: the router assigns IP addresses to clients Mode of dynamic IP automatically in accordance with the specified parameters.
  • Page 83 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual In the Static IP Addresses section, you can specify MAC address and IPv4 address pairs (set a fixed IPv4 address in the local area network for a device with a certain MAC address). The router...

  • Page 84: Ipv6

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual IPv6 Go to the IPv6 tab to change IPv6 address of the router and configure IPv6 addresses assignment settings. Figure 71. Configuring the local interface. The IPv6 tab. The Local IPv6 Address section.
  • Page 85 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 72. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section. Parameter Description Dynamic IPv6 Addresses Select the needed value from the drop-down list.
  • Page 86 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual In the Static IP Addresses section, you can specify MAC address and IPv6 address pairs (set a fixed IPv6 address in the local area network for a device with a certain MAC address). The router...

  • Page 87: Wi-Fi

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network. Basic Settings In the Wi-Fi / Basic Settings section, you can change basic parameters for the wireless interface of the router and configure the basic and additional wireless networks.
  • Page 88 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual In the General Settings section, the following parameters are available: Parameter Description To enable Wi-Fi connection, move the switch to the right. Enable Wireless To disable Wi-Fi connection, move the switch to the left.
  • Page 89 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Wi-Fi Network A name for the wireless network. The name can consist of digits and Network name (SSID) Latin characters. If the switch is moved to the right, other users cannot see your Wi-Fi Hide SSID network.
  • Page 90 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual In the Security Settings section, you can change security settings of the wireless network. By default, the WPA2-PSK network authentication type of the wireless network is specified. WPS PIN from the barcode label is used as the network key.
  • Page 91 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual When the Open or WEP value is selected, the following settings are displayed on the page (unavailable for the wireless network operating modes which support the standard 802.11n): Figure 77.
  • Page 92 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed value is selected, the following fields are displayed on the page: Figure 78. The WPA2-PSK value is selected from the Network authentication drop-down list.
  • Page 93 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the following settings are displayed on the page: Figure 79. The WPA2 value is selected from the Network authentication drop-down list.

  • Page 94: Client Management

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Client Management On the Wi-Fi / Client Management page, you can view the list of wireless clients connected to the router. Figure 80. The page for managing the wireless clients.

  • Page 95: Wps

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a method for connection to the WLAN. The WPS function helps to configure the protected wireless network automatically. Devices connecting to the wireless network via the WPS function must support the WPS function.
  • Page 96 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual When the WPS function is enabled, the Information section is available on the page. Parameter Description The state of the WPS function: Configured (all needed settings are specified; these settings •...

  • Page 97: Using Wps Function Via Web-Based Interface

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Using WPS Function via Web-based Interface To connect to the basic wireless network via the PIN method of the WPS function, follow the next steps: 1. Click the ENABLE WPS button.

  • Page 98: Using Wps Function Without Web-Based Interface

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Using WPS Function without Web-based Interface You can use the WPS function without accessing the web-based interface of the router. To do this, you need to configure the following router's settings: 1.

  • Page 99: Wmm

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. The WMM function implements the QoS features for Wi-Fi networks. It helps to improve the quality of data transfer over Wi-Fi networks by prioritizing different types of traffic.
  • Page 100 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual To edit the parameters of an Access Category, left-click the relevant line. In the opened window, change the needed parameters. Figure 83. The window for changing parameters of the WMM function.
  • Page 101 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Click the SAVE button. To disable the WMM function, click the DISABLE button. Page 101 of 188...

  • Page 102: Client

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Client On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access point or to a WISP. Figure 84. The page for configuring the client mode.
  • Page 103 An encryption method: TKIP, AES, or TKIP+AES. When you have configured the parameters, click the APPLY button. When connecting to a wireless access point, the wireless channel of DVG-N5402SP will switch to the channel of the access point to which you have connected.

  • Page 104: Additional

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Additional On page of the Wi-Fi / Additional section, you can define additional parameters for the WLAN of the router. Changing parameters presented on this page may negatively affect your WLAN! Figure 85.
  • Page 105 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description The 802.11b and 802.11g protection function is used to minimize collisions between devices of your wireless network. Select a value from the drop-down list. Auto: The protection function is enabled and disabled automatically...

  • Page 106: Mac Filter

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual MAC Filter On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
  • Page 107 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description A wireless network to which the rule will be applied. Select the SSID needed value from the drop-down list.

  • Page 108: Advanced

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Advanced In this menu you can configure advanced settings of the router: create groups of ports for VLANs • add name servers • configure a DDNS service •...

  • Page 109: Vlan

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual VLAN On the Advanced / VLAN page, you can create and edit groups of ports for virtual networks (VLANs). By default, 2 groups are created in the router's system: lan: it includes ports 1-4.
  • Page 110 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description Name A name for the port for easier identification. Enable Move the switch to the right to allow using this group of ports.

  • Page 111: Dns

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual On the Advanced / DNS page, you can add DNS servers to the system. Figure 90. The Advanced / DNS page. DNS servers are used to determine the IP address from the name of a server in Intranets or the Internet (as a rule, they are specified by an ISP or assigned by a network administrator).
  • Page 112 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual If needed, you can add your own address resource record. To do this, click the ADD button ( Figure 91. The window for adding a DNS record.

  • Page 113: Ddns

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses. Figure 92. The Advanced / DDNS page.
  • Page 114 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual To edit parameters of the existing DDNS service, select the relevant line in the table. On the opened page, change the needed parameters and click the SAVE button.

  • Page 115: Ports Settings

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Ports Settings On the Advanced / Ports Settings page, you can configure or disable autonegotiation of speed and duplex mode or manually configure speed and duplex mode for each Ethernet port of the router.
  • Page 116 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 95. The window for changing the settings of the router's port. In the opened window, specify the needed parameters: Parameter Description Data transfer mode. Select the auto value to enable autonegotiation.

  • Page 117: Flow Control

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Flow Control Move the switch to the right to enable the flow control function for the port. Symmetric flow control Move the switch to the left to disable the flow control function for the port.

  • Page 118: Redirect

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Redirect On the Advanced / Redirect page, you can enable notifications on the reason of the Internet connection failure. Notifications will be displayed in the browser window when a user is attempting to open a web site on the Internet.

  • Page 119: Routing

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Routing On the Advanced / Routing page, you can specify static (fixed) routes. Figure 97. The Advanced / Routing page. To specify a new route, click the ADD button ( Figure 98.
  • Page 120 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Protocol An IP version. From the drop-down list, select an interface (connection) through which the device will communicate with the remote network. If you...

  • Page 121: Tr-069 Client

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual TR-069 Client On the Advanced / TR-069 Client page, you can configure the router for communication with a remote Auto Configuration Server (ACS). The TR-069 client is used for remote monitoring and management of the device.
  • Page 122 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Inform Settings Move the switch to the right so the router may send reports (data on Enable the device and network statistics) to the ACS.

  • Page 123: Remote Access

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Remote Access On the Advanced / Remote Access page, you can configure access to the web-based interface of the router. By default, the access from external networks to the router is closed. If you need to allow access to the router from the external network, create relevant rules.
  • Page 124 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description A host or a subnet to which the rule is applied. You can specify an IP address IPv4 or IPv6 address. For the IPv4-based network only.

  • Page 125: Upnp Igd

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual UPnP IGD On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The router uses the UPnP IGD protocol for automatic configuration of its parameters for network applications requiring an incoming connection to the router.

  • Page 126: Udpxy

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual UDPXY On the Advanced / UDPXY page, you can allow the router to use the built-in UDPXY application. The UDPXY application transforms UDP traffic into HTTP traffic. This application allows devices which cannot receive UDP streams to access stream video.
  • Page 127 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 104. The UDPXY application status page. Page 127 of 188...

  • Page 128: Igmp

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual IGMP On the Advanced / IGMP page, you can allow the router to use IGMP. IGMP is used for managing multicast traffic (transferring data to a group of destinations). This protocol allows using network resources for some applications, e.g., for streaming video, more...

  • Page 129: Alg/Passthrough

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual ALG/Passthrough On the Advanced / ALG/Passthrough page, you can allow the router to use RTSP, enable the SIP ALG and PPPoE/PPTP/L2TP/IPsec pass through functions. SIP is used for creating, modifying, and terminating communication sessions. This protocol allows telephone calls via the Internet.
  • Page 130 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual The following elements are available on the page: Parameter Description Move the switch to the right to enable SIP. Such a setting allows using the SIP ALG function. This function allows VoIP traffic to pass through the NAT-enabled router.

  • Page 131: Ipsec

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual IPsec On the Advanced / IPsec page, you can configure VPN tunnels based on IPsec protocol. IPsec is a protocol suite for securing IP communications. Figure 107. The Advanced / IPsec page.
  • Page 132 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual To create a new tunnel, click the ADD button ( ) in the Tunnels section. Setting for both devices which establish the tunnel should be the same.
  • Page 133 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Identifier value Specify the local host identifier. Pre-shared key A key for mutual authentication of the parties. Select a WAN connection through which the tunnel will pass. When...
  • Page 134 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Maximum Segment Size of a TCP packet. This parameter influences the size of a TCP packet which will be sent from a remote host to the router.
  • Page 135 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 109. The page for adding an IPsec tunnel. The First Phase / The Second Phase sections. Parameter Description The First Phase First phase Select encryption algorithm from the drop-down list.
  • Page 136 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description The lifetime of IPsec-SA keys in seconds. After the specified period it is required to renegotiate the keys. Specify 0 if you don't want to limit IPsec-SA lifetime the lifetime of the keys.

  • Page 137: Voip

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual VoIP In this menu you can configure all parameters essential for VoIP via SIP and specify all needed settings for the phone connected to the router. Basic Settings On the VoIP / Basic Settings page, you can configure all needed settings for VoIP via SIP.
  • Page 138 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description A port of the SIP outbound proxy server. Unless another setting is given by your ISP, it is recommended to leave the default value Port (5060).
  • Page 139 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Digest Authorization Digest authorization is a method of transmitting a user's authorization request upon the first access to the SIP server. Digest authorization In order to use this function, move the switch to the right. Upon that the Realm field is available for editing.

  • Page 140: Advanced

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Advanced On the VoIP / Advanced settings page, you can specify additional settings for VoIP via SIP. Figure 113. The VoIP / Advanced page. Parameter Description Common Settings From the drop-down list, select a mode for DTMF signal transmission.

  • Page 141: Network Settings

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Select your country from the drop-down list. By default, the value Locale selection RU (Russia) is specified. This setting defines the parameters of the phone signals traditional for the specific country.
  • Page 142 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description CallerID The Caller ID parameter (Caller Identification Number) allows you to identify a caller number before you pick up the receiver. Type From the drop-down list, select a standard the router uses to send the parameter to the connected phone.
  • Page 143 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description A public (“white”) IP address of an upper-level router which Public address exchanges service messages with the SIP proxy server. If the STUN value is selected from the Mode drop-down list, a port of a STUN server to which a connection is established is displayed.

  • Page 144: Sip Lines

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual SIP Lines On the VoIP / SIP Lines page, you can specify incoming/outgoing call settings for the SIP line. Figure 114. The VoIP / SIP Lines page.
  • Page 145 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to speed up dialing with pressing # (the Enable pound key pound key) immediately after dialing numbers. Message Waiting Indicator.

  • Page 146: Fax Settings

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Fax Settings On the VoIP / Fax Settings page, you can specify settings of data receipt/transfer for the machine connected to the FXS port of the router.

  • Page 147: Audio Settings

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Audio Settings On the VoIP / Audio settings page, you can configure audio parameters, volume and voice codecs. Figure 116. The VoIP / Audio Settings page. In the Volume Settings section, you can configure the earphone volume and the microphone sensitivity for the phone connected to the FXS port of the router.
  • Page 148 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual In the Codecs Settings section, you can configure work of voice codecs in use. To change parameters of a codec, left-click the relevant line in the table.

  • Page 149: Routing Call

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Routing Call On the VoIP / Routing Call page, you can fill in the phone book for a device connected to the FXS port of the router.
  • Page 150 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual To use a number specified in the Abbreviated Dial section, dial the needed short number on the phone set. In the Dialplan Settings section, you can configure the dial plan for VoIP. To do this, move the Use dialplan switch to the right and in the Dialplan field displayed, specify the needed rule.

  • Page 151: Call Feature Codes

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Call Feature Codes On the VoIP / Call Feature Codes page, you can allow changing some parameters of the router directly from the phone set connected to the FXS port of the router.
  • Page 152 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Also the following call feature codes are available on the page: Parameter Description Disable Call Waiting Disables the call waiting function. Enable Call Waiting Enables the call waiting function.
  • Page 153 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description Disable Do Not Disturb Disables rejection of incoming calls. Enables rejection of all incoming calls (the busy tone Enable Do Not Disturb will be heard).

  • Page 154: Call Logging

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Call Logging On the VoIP / Call Logging page, you can configure the call log parameters and view information on all calls. Figure 121. The VoIP / Call Logging page.

  • Page 155: Security

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Security On the VoIP / Security page, you can configure filtering rules for incoming calls of the phone connected to the FXS port of the router. Figure 122. The VoIP / Security page.

  • Page 156: Firewall

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Firewall In this menu you can configure the firewall of the router: add rules for IP filtering • create virtual servers • define a DMZ • configure the MAC filter •...
  • Page 157 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 124. The page for adding a rule for IP filtering. You can specify the following parameters: Parameter Description General Settings Move the switch to the right to enable the rule.
  • Page 158 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description A protocol for network packet transmission. Select a value from the Protocol drop-down list. An IP version to which the rule will be applied. Select the relevant IP version value from the drop-down list.
  • Page 159 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Parameter Description A port of the source IP address. You can specify one port, several Source port ports separated by a comma, or a range of ports separated by a colon.

  • Page 160: Virtual Servers

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Virtual Servers On the Firewall / Virtual Servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
  • Page 161 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description General Settings A name for the virtual server for easier identification. You can Name specify any name. Select a virtual server template from the drop-down list, or select...

  • Page 162: Dmz

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual A DMZ is a host or network segment located “between” internal (local) and external (global) networks. In the router, the DMZ implements the capability to transfer a request coming to a port of the router from the external network to a specified host of the internal network.

  • Page 163: Mac Filter

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual MAC Filter On the Firewall / MAC Filter page, you can configure MAC-address-based filtering for computers of the router's LAN. Figure 128. The Firewall / MAC Filter page.
  • Page 164 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the rule. Enable rule Move the switch to the left to disable the rule.

  • Page 165: Url Filter

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual URL Filter On the Firewall / URL Filter page, you can specify restrictions on access to certain web sites. Figure 130. The Firewall / URL Filter page.

  • Page 166: System

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual System In this menu you can do the following: change the password used to access the router's settings • restore the factory default settings • create a backup of the router's configuration •...

  • Page 167: Configuration

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Configuration On the System / Configuration page, you can change the password for the administrator account used to access the web-based interface of the router and to access the device settings via TELNET,...
  • Page 168 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual The following buttons are also available on the page: Control Description Click the button to restore the factory default settings. Also you can Factory restore the factory defaults via the hardware RESET button (see the Back Panel section, page 12).

  • Page 169: Firmware Update

    To enable the automatic check for firmware updates, in the Remote Update section, move the Check for updates automatically switch to the right and click the APPLY SETTINGS button. By default, in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is specified.

  • Page 170: Local Update

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Local Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown. To update the firmware of the router locally, follow the next steps: 1.

  • Page 171: Remote Update

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Remote Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown. To update the firmware of the router remotely, follow the next steps: 1.

  • Page 172: Log

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual On the System / Log page, you can set the system log options and configure sending the system log to a remote host. Figure 133. The System / Log page. The Settings tab.
  • Page 173 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual To view the system log, go to the Log tab. Figure 134. The System / Log page. The Log tab. To view the latest system events, click the REFRESH button.

  • Page 174: Ping

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility. The Ping utility sends echo requests to a specified host and receives echo replies.
  • Page 175 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual To specify additional settings, click the MORE SETTINGS button. Figure 136. The System / Ping page. The additional settings window. In the opened window, in the Packet size field, specify the volume of data sent in a request. In the Time to wait for a response field, specify the response waiting period in seconds.

  • Page 176: Traceroute

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Traceroute On the System / Traceroute page, you can determine the route of data transfer to a host via the traceroute utility. Figure 137. The System / Traceroute page.
  • Page 177 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Figure 138. The System / Traceroute page. The additional settings window. In the opened window, you can specify the following parameters: Parameter Description Specify the TTL (Time to live) parameter value. The default value is...

  • Page 178: Telnet

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Telnet On the System / Telnet page, you can enable or disable access to the device settings via TELNET from your LAN. Access via TELNET is disabled by default. It is automatically enabled after changing the default administrator password.

  • Page 179: System Time

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual System Time On the System / System Time page, you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet.
  • Page 180 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual In some cases NTP servers addresses are provided by your ISP. In this case, you need to move the Get NTP server addresses using DHCP switch in the NTP Settings section to the right and click the APPLY button.

  • Page 181: Yandex.dns

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Yandex.DNS This menu is designed to configure the Yandex.DNS service. Yandex.DNS is a web content filtering service which provides the DNS server, protects a computer against malicious web sites, and blocks access to adult web sites.
  • Page 182 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual When the service is enabled, the Default Mode section is displayed on the page. Select the needed choice of the radio button to configure filtering for all devices of the router's network: Protection off: when this value is selected, the service provides the DNS server with no •...

  • Page 183: Devices And Rules

    DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual Devices and Rules On the Yandex.DNS / Devices and Rules page, you can specify a filtering mode for each device separately. Figure 142. The Yandex.DNS / Devices and Rules page.
  • Page 184 DVG-N5402SP Wireless Router with 1 FXS Port Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description MAC address The MAC address of a device from the router's LAN. The IP address of a device from the router's LAN.

  • Page 185: Chapter 5. Operation Guidelines

    DVG-N5402SP Wireless Router with 1 FXS Port Operation Guidelines User Manual CHAPTER 5. OPERATION GUIDELINES Safety Rules and Conditions Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged. The device should be used only as intended in accordance with the documents.

  • Page 186: Wireless Installation Considerations

    User Manual Wireless Installation Considerations The DVG-N5402SP device lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range.

  • Page 187: Chapter 6. Abbreviations And Acronyms

    DVG-N5402SP Wireless Router with 1 FXS Port Abbreviations and Acronyms User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Access Category Advanced Encryption Standard Address Resolution Protocol BSSID Basic Service Set Identifier Cyclic Redundancy Check DDNS Dynamic Domain Name System DDoS Distributed Denial of Service...
  • Page 188 DVG-N5402SP Wireless Router with 1 FXS Port Abbreviations and Acronyms User Manual PPTP Point-to-point tunneling protocol Pre-shared key Quality of Service RADIUS Remote Authentication in Dial-In User Service Routing Information Protocol Request To Send RTSP Real Time Streaming Protocol Session Initiation Protocol...

Table of Contents