DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Creating Bridge WAN Connection
On the connection creation page, go to the General Settings tab. Then select the relevant value
from the Connection type drop-down list and specify the needed values.
Figure 90. The page for creating a new Bridge connection. The General Settings section.
Parameter
Interface
Connection name
Enable connection
General Settings
A physical or virtual WAN interface to which the new connection
will be assigned.
A name for the connection for easier identification.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Page 112 of 311
Configuring via Web-based Interface
Description