DSL-2740U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
CHAPTER 4.
INTERFACE
Initial Configuration Wizard
To start the Initial Configuration Wizard, go to the Initial Configuration section. On the opened
page, click the OK button and wait until the factory default settings are restored.
Click the START button.
On the opened page, click YES in order to leave the current language of the web-based interface or
click NO to select another language.
CONFIGURING
Figure 21. Restoring the default settings in the Wizard.
Figure 22. Starting the Wizard.
Figure 23. Selecting a language.
Page 34 of 174
Configuring via Web-based Interface
VIA
WEB-BASED