The ATC Control Module box contains:
• ATC Control Module
Setup options
The system can be set up in two ways.
Table 2 Automated Thermal Cycler (ATC) System configurations
Setup option
Within a Robotic environment
Stand-alone system
Site requirements
The Automated Thermal Cycler (ATC) System is for indoor use. Ensure that the installation site:
• Meets the spatial and weight requirements (see "System specifications"
• Meets environmental requirements (see "Environmental requirements"
• Is within 1 m (3 ft.) of an AC power source receptacle
• Is away from water
Automated Thermal Cycler (ATC) System User Guide
Chapter 1 About the Automated Thermal Cycler (ATC) System
image
Setup options
on page
9)
on page
8)
1
7