Table of Contents
Advertisement
Chapter 5
Setting the Plate Layout or Auto Scale Parameters
5
5.4 Using Well Types Options
Unknown
5-8
Applied Biosystems
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The Well types options enable you to assign a specific sample
type to a single well or groups of wells. The options are:
•
Unknown
•
Standard
•
Control
•
Blank
•
Exclude
•
Empty
•
Hidden
•
Clear well
•
Auto Scale
NOTE: The CytoFluor software cannot generate a standard
curve or calculate unknown concentrations. You must
export the data to another application (for example,
CytoCalc Data Analysis Software) for these calculations.
See Chapter 4, Displaying, Printing, and Exporting Data, for
details.
The following sections describe the options in the order listed.
To define a well or group of wells as unknowns:
1.
Click on the Unknown button in the Plate Layout
screen.
2. Select an index value from the pull-down menu (00 to 99).
3. Select the well(s) on your assay plate that corresponds to
replicates for this unknown. (Click with your mouse, or
click and drag to select a group of wells.) The system
enters the abbreviation "un" and the index value into the
wells you select.
Advertisement
Table of Contents
