Table of Contents
Advertisement
4 Operating the thermostat from the thermostat
4.1 Temperature control
A6V10733807_enUS_a
main unit
The thermostat acquires the room temperature using the built-in sensor and/or the
external room temperature sensor, and maintains the setpoint by delivering control
commands to heating and/or cooling equipment. If no external room temperature
sensor is connected or if the input value of the external sensor is invalid, only the
built-in sensor is used to provide values for the thermostat. If the external sensor is
connected and can provide valid values with the built-in sensor, the thermostat
displays the average value of the built-in and external sensors.
On the home screen, the current room temperature is displayed and the
temperature setpoint can be changed as desired. The units can be selected
between °C and °F (the default unit).
NOTICE
After the initial setup of the thermostat, the displayed room temperature may not
be correct because the temperature sensors need time for the calibration. Wait for
at least one hour for the calibration.
To adjust the temperature setpoint on the home screen
●
From the Home screen, drag the temperature slider to the right to increase the
temperature setpoint, or to the left to decrease the temperature setpoint.
To change the temperature unit
1. From the Home screen, tap
2. Tap
and then tap
change from Celsius to Fahrenheit.
Operating the thermostat from the thermostat main unit
, and then tap .
to change from Fahrenheit to Celsius, or tap
4
Temperature control
to
13 | 38
Advertisement
Table of Contents
