Table of Contents
Advertisement
Available models: TN 80-0.1US
1 Overview
Model TN- US is a digital ultrasonic thickness gauge based on the same operating
principles as SONAR. The instruments are capable of measuring the thickness of
various materials with an accuracy of 0.1/0.01 mm. They are suitable for a variety of
metallic and non- metallic materials.
1.1 Product specifications
Display:
4.5 digits LCD with EL backlight
Measuring range: 0.75 to 300mm (in steel)
Sound velocity: 1000 to 9999m/s
Resolution: TN xx0.1 US:
TN xx0.01US:
Model TN 80-0.01measures continuously with a resolution of 0.01
Model TN 230-0.01 US as well as TN 300-0.01 are measuring with a
readout of 0.01 up to 200mm
and over this, each device measures with a resolution of 0.1
Accuracy: Models with a resolution of 0.1mm:
0.5% of the measured value +0.04mm
Models with a resolution of 0.01mm: 1% of the measured value
In dependence on material and environmental conditions.
Units: Metric/ Imperial units selectable
-
Four measurements readings per second at single point measurement and ten
per second at Scan Mode.
-
Memory up to 20 files (up to 99 values for each file) of stored values
Power supply: 2x AA, 1.5V alkaline batteries
Typical operating time: about 100 hours
(EL backlight off)
TN_US-BA-e-1814
TN 230-0.1US
TN 300-0.1US
TN 80-0.01US
TN 230-0.01US
TN 300-0.01US
0,1mm;
0,1 / 0,01mm
3
Advertisement
Table of Contents
