System Features; Front Panel - ConMed LS7700 Service Manual

❷
❶
1.5

System Features

1.5.1

Front Panel

❶
"POWER" Button — Allows the
user to toggle between light source
OFF condition and light source ON
condition. The associated "POWER" LED
illuminates orange in light source OFF
condition and green in light source ON
condition.
❷
"STAND-BY" Button — Allows
the user to place the unit in stand-by
mode to prevent light from exiting
the light guide. Pressing the STAND-BY
button again will return the brightness level
to its previous setting and will allow light to
be emitted through the light guide.
❸
Organic Light Emitting Diode (OLED)
Display — Displays the settings of the light
source such as stand-by mode, brightness
level, lamp life hours remaining and power
on or off.
❸ ❹
❹
"BRIGHTNESS" Buttons —
Allows the user to increase or
decrease the light output.
❺
Light Guide Lever — Allows the
user to open the LGR for insertion /
removal of a fiber optic light guide. The
lever is spring loaded to hold the light guide
during use. It also can be used to "lock" the
light guide firmly in place.
❻
Light Guide Receptacle (LGR) —
Accepts and secures the fiber optic
light guide. When in stand-by mode
the light guide receptacle (LGR)
illuminates green.
NOTE: Only insert clean, dry,
non-conductive fiber optic light guides into
the light guide receptacle (LGR).
5
❺
❻