Software Update Page - Omicron Lab OTMC 100 Series User Manual

7.4.2 Software Update page

Current version
New image file
Keep settings
Update button
If the software update process fails due to any reason, OTMC 100 will enter a recovery
mode on the next power-up. In this mode, the device provides only a rudimentary web
interface (similar to the Software Update page) just allowing for the upload of a software
image.
OMICRON
Displays the version number of the software currently installed on
OTMC 100.
Click the Browse... button to navigate to the software image file. The path
and file name is displayed in the field after selecting it in the file open
dialog.
If this check box is selected, the user specific configuration settings are kept
during a software update. Deselect the check box to automatically reset the
device configuration to the factory defaults after a software update.
Click the Update button to start the software update. The update process
may take up to ten minutes. Do not disconnect OTMC 100 or the computer
during this process.
OTMC 100 automatically restarts after the software update completed.
The OTMC 100 web interface
79